Philips Semiconductors
Control circuit for switched mode power supplies
Product specification
TDA8380A
GENERAL DESCRIPTION
The TDA8380A is an integrated circuit intended for use as a control circuit in low-cost switched mode power supplies for
television, monitors and small industrial equipment. The TDA8380A operates using duty factor regulation in the fixed
frequency mode.
Features
• A low-current initialization circuit (maximum 150 µA) which can be switched off
• A bandgap reference generator
• Circuitry for slow-start combined with an accurate setting of the maximum duty factor (Dmax)
• Programmable low supply voltage protection with one default value
• High supply protection circuitry
• Error amplifier with a transfer characteristic generator (TCG)
• Protection against open- and short-circuited feedback loop
• An overload voltage foldback
• Primary current protection circuitry for both cycle-by-cycle and trip mode
• Protection against transformer saturation
• A direct drive output stage (sink current 2.5 A, source current 0.75 A)
• Anti-double pulse logic
• Protected against damage as a result of a short-circuited high-voltage transistor
• RC oscillator with synchronization input
QUICK REFERENCE DATA
PARAMETER
Supply voltage
Supply current
Output pulse repetition frequency range
Operating ambient temperature range
SYMBOL
VCC
ICC
fo
Tamb
MIN.
−
−
10
−25
TYP.
14
−
−
−
MAX.
−
15
100
+ 70
UNIT
V
mA
kHz
°C
PACKAGE OUTLINE
16-lead DIL; plastic (SOT38); SOT38-1 ; 1996 November 18.
November 1993
2