DBQ/DVQ Series
420W Digital Fully Regulated Intermediate
DC-DC Bus Converter
DBQ0360V2 FUNCTIONAL SPECIFICATIONS (CONT.)
MECHANICAL
Outline Dimensions (open frame)
Conditions ➀
Minimum
Typical/Nominal
2.3 x 1.45 x 0.48
Maximum
Units
Inches
(Please refer to outline drawing)
LxWxH
58.4 x 36.83 x 12.19
mm
Outline Dimensions (with baseplate)
2.3 x 1.45 x 0.50
Inches
58.4 x 36.80 x 12.7
mm
Weight (open frame)
TBD
Ounces
Grams
Weight (with baseplate)
TBD
Ounces
Grams
Through Hole Pin Diameter
0.04 & 0.062
Inches
1.016 & 1.575
mm
PRELIMINARY Digital Interface Pin Diameter
Through Hole Pin Material
TH Pin Plating Metal and Thickness
ENVIRONMENTAL
Operating Ambient Temperature Range
Operating Baseplate Temperature
Storage Temperature
Thermal Protection/Shutdown (with “B” Suffix,
default value, Configurable via PMBUS)
Electromagnetic Interference
Conducted, EN55022/CISPR22
RoHS rating
Nickel subplate
Gold overplate
with derating
Vin = Zero (no power)
Configurable Via PMBus
External filter required; see
emissions performance test.
0.02
0.5
Copper alloy
98.4-299
4.7-19.6
μ-inches
μ-inches
-40
85
°C
-40
110
°C
-55
125
°C
120
°C
B
RoHS-6
Class
Notes
➀ Typical at TA = +25°C under nominal line voltage and full-load conditions. All models are speci-
fied with external 1μF and 10μF capacitors in parallel across their output pins. All values are
default, unless otherwise noted.
➁ Over-current protection is non-latching with auto recovery (hiccup).
➂ Regulation specifications describe the output voltage changes as the line voltage or load current
is varied from its nominal or midpoint value to either extreme.
➃ See Operating information section.
www.murata-ps.com/support
MDC_DBQ Series.B02Δ Page 6 of 31