73S8014RT-ILR View Datasheet(PDF) - Teridian Semiconductor Corporation
Part Name
Description
Manufacturer
73S8014RT-ILR Datasheet PDF : 29 Pages
| |||
73S8014RT Data Sheet
DS_8014RT_015
2 Electrical Specifications
This section provides the following:
Absolute maximum ratings
Recommended operating conditions
Package thermal parameters
Smart card interface requirements
Digital signals characteristics
DC Characteristics
Voltage Fault Detection Circuits
2.1 Absolute Maximum Ratings
Table 2 lists the maximum operating conditions for the 73S8014RT. Permanent device damage may occur if
absolute maximum ratings are exceeded. Exposure to the extremes of the absolute maximum rating for extended
periods may affect device reliability. The smart card interface pins are protected against short circuits to VCC,
ground, and each other.
Table 2: Absolute Maximum Device Ratings
Parameter
Supply Voltage VDD
Supply Voltage VPC
Input Voltage for Digital Inputs
Storage Temperature
Pin Voltage (except card interface)
Pin Voltage (card interface)
ESD Tolerance – Card interface pins
ESD Tolerance – Other pins
Rating
-0.5 to 6.0 VDC
-0.5 to 6.0 VDC
-0.3 to (VDD +0.5) VDC
-60 to 150°C
-0.3 to (VDD +0.5) VDC
-0.3 to (VCC + 0.5) VDC
+/- 6kV
+/- 2kV
* Note: ESD testing on smart card pins is HBM condition, 3 pulses, each polarity referenced to ground.
Note: Smart Card pins are protected against shorts between any combinations of Smart Card pins.
2.2 Recommended Operating Conditions
Function operation should be restricted to the recommended operating conditions specified in Table 3.
Table 3: Recommended Operating Conditions
Parameter
Supply Voltage VDD
Supply Voltage VPC
Ambient Operating Temperature
Input Voltage for Digital Inputs
Rating
2.7 to 5.5 VDC
4.75 to 5.5 VDC
-40°C to +85°C
0V to VDD + 0.3V
2.3 Package Thermal Parameters
Table 4 lists the 73S8014RT Smart Card package thermal parameters.
Table 4: Package Thermal Parameters
Parameter
20 SO
Rating
50°C / W
8
Rev. 1.0
Share Link: 