ADM1034ARQ View Datasheet(PDF) - Analog Devices
Part Name
Description
Manufacturer
ADM1034ARQ Datasheet PDF : 40 Pages
| |||
ADM1034
Table 51. Register 0x10, Remote 1 THERM Limit, Power-On Default = 0x95, Lock = Y, SW Reset = N
Bit Name
R/W Description
<7:0> Remote 1 THERM Limit R/W
When the Remote 1 temperature exceeds this temperature, the corresponding status bit is set
and the THERM output is activated.
Table 52. Register 0x11, Remote 2 High Limit, Power-On Default = 0x8B, Lock = N, SW Reset = N
Bit Name
R/W Description
<7:0> Remote 2 High Limit R/W When the Remote 2 temperature exceeds this temperature, the corresponding interrupt status
bit is set.
Table 53. Register 0x12, Remote 2 Low Limit, Power-On Default = 0x54, Lock = N, SW Reset = N
Bit Name
R/W Description
<7:0> Remote 2 Low Limit
R/W When the Remote 2 temperature falls below this temperature, the corresponding interrupt
status bit is set.
Table 54. Register 0x13, Remote 2 THERM Limit, Power-On Default = 0x95, Lock = Y, SW Reset = N
Bit Name
R/W Description
<7:0> Remote 2 THERM Limit R/W
When the Remote 2 temperature exceeds this temperature, the corresponding status bit is set
and the THERM output is activated.
Table 55. Register 0x16, Local Offset Register, Power-On Default = 0x00, Lock = Y, SW Reset = N
Bit
Name
R/W Description
<7:0> Local Offset
R/W Allows a twos compliment offset to be automatically added to or subtracted from the local
temperature measurement. Resolution = 0.125°C. Maximum offset from −16°C to +15.875°C.
Default = 0.
Table 56. Register 0x17, Remote 1 Offset Register, Power-On Default = 0x00, Lock = Y, SW Reset = N
Bit
Name
R/W Description
<7:0> Remote 1 Offset
R/W Allows a twos compliment offset to be automatically added to or subtracted from the Remote
1 temperature measurement. Resolution = 0.125°C. Maximum offset from −16°C to +15.875°C.
Default = 0.
Table 57. Register 0x18, Remote 2 Offset Register, Power-On Default = 0x00, Lock = Y, SW Reset = N
Bit
Name
R/W Description
<7:0> Remote 2 Offset
R/W Allows a twos compliment offset to be automatically added to or subtracted from the Remote
2 temperature measurement. Resolution = 0.125°C. Maximum offset from −16°C to +15.875°C.
Default = 0.
Table 58. Register 0x19, THERM Timer % Limit, Power-On Default = 0xFF, Lock = Y, SW Reset = N
Bit
Name
R/W Description
<7:0> THERM Timer on%
Limit
R/W If the THERM is asserted for greater than this limit on the time window, the corresponding
status bit is set.
Table 59. Register 0x1A, THERM Hysteresis, Power-On Default = 0x05, Lock = Y, SW Reset = N
Bit
Name
R/W Description
<7:4> Reserved
R
Reserved.
<3:0> THERM Hysteresis
R/W An unsigned THERM hysteresis value, LSB = 1°C. Once THERM has been activated on a
temperature channel, the THERM limit – hysteresis is deactivated if the temperature drops
below THERM.
Rev. 0 | Page 36 of 40
Share Link: 