HLMP-EG08-WZ000 View Datasheet(PDF) - HP => Agilent Technologies

Part Name

Description

Manufacturer

HLMP-EG08-WZ000

T-13/4(5 mm) Precision Optical Performance AlInGaP LED Lamps

HP => Agilent Technologies 

9

Absolute Maximum Ratings at TA = 25°C

DC Forward Current[1,2,3] .................................................................. 50 mA

Peak Pulsed Forward Current[2,3] ................................................. 100 mA

Average Forward Current[3] ............................................................. 30 mA

Reverse Voltage (IR = 100 µA) ................................................................ 5 V

LED Junction Temperature .............................................................. 130° C

Operating Temperature ................................................... -40° C to +100° C

Storage Temperature ....................................................... -40° C to +120° C

Wave Solder Temperature ........................................ 250° C for 3 seconds

[1.59 mm (0.060 in.) below body]

Notes:

1. Derate linearly as shown in Figure 4.

2. For long term performance with minimal light output degradation, drive currents

between 10 mA and 30 mA are recommended. For more information on recommended

drive conditions, please refer to Application Brief I-024 (5966-3087E).

3. Operating at currents below 1 mA is not recommended. Please contact your local

representative for further information.

Electrical/Optical Characteristics at TA = 25°C

Parameter

Symbol Min. Typ.

Forward Voltage

Amber (λd = 590 nm)

2.02

Orange (λd = 605 nm)

VF

1.98

Red-Orange (λd = 615 nm)

1.94

Red (λd = 626 nm)

1.90

Reverse Voltage

VR

5

20

Peak Wavelength:

Amber (λd = 590 nm)

592

Orange (λd = 605 nm)

λPEAK

609

Red-Orange (λd = 615 nm)

621

Red (λd = 626 nm)

635

Spectral Halfwidth

∆λ1/2

17

Speed of Response

τs

20

Capacitance

Thermal Resistance

C

40

RθJ-PIN

240

Luminous Efficacy[1]

Amber (λd = 590 nm)

480

Orange (λd = 605 nm)

ηv

370

Red-Orange (λd = 615 nm)

260

Red (λd = 626 nm)

150

Max.

2.4

Units

V

Test Conditions

IF = 20 mA

V

IF = 100 µA

Peak of Wavelength of

Spectral Distribution

nm at IF = 20 mA

nm

ns

pF

°C/W

lm/W

Wavelength Width at

Spectral Distribution

1/2 Power Point at

IF = 20 mA

Exponential Time

Constant, e-t/τs

VF = 0, f = 1 MHz

LED Junction-to-Cathode

Lead

Emitted Luminous

Power/Emitted Radiant

Power

Note:

1. The radiant intensity, Ie, in watts per steradian, may be found from the equation Ie = Iv/ηv, where Iv is the luminous intensity in candelas and ηv is

the luminous efficacy in lumens/watt.

Share Link: