HSC-AT11U-A02 View Datasheet(PDF) - HIROSE ELECTRIC
Part Name
Description
Manufacturer
HSC-AT11U-A02 Datasheet PDF : 5 Pages
| |||
HSC-AT11 Series●SC Type Fixed Attenuators(for single mode)
■Product Specifications
●AdPC (Advanced PC) Polishing type: Return Loss ≥ 40dB
Ratings
Operating temperature range
Max. Input Power
-40°C to +75°C
250mW
Storage temperature range
Fiber type
-40°C to +85°C
SM
Item
Attenuation
Return Loss
Test Method
Measurement at a point within wavelength of 1310±30
nm and a point within wavelength of 1550±30 nm.
Requirments
See the attenuation table on the next page
≥40dB
Engagement and
Separation forces
Gauge retention force
Durability
Engagement and separation forces at 50mm/s.
Zirconia gauge at φ2.499 ±0.0005mm.
500 times
Engagement force ≦ 19.6N
Separation force ≦ 19.6N
2.0N to 3.9N
Flex test
8.82N load, 100 cycles
Telcordia GR-910-CORE
Twist test
Side test
Vibration
Impact test
Heat/humidity cycles
Heat cycles
Dray heat
Cold
Salt mist
■Materials
Part
Body
Ferrule
Split sleeve
13.23N load, 10 cycles
Telcordia GR-910-CORE
12.25 N load, 90° angle
Telcordia GR-910-CORE
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 3
hours in each of the 3 axis.
Acceleration of 981 m/s2, 6 ms duration,half sine shock
pulse, 3 cycles in each of the 3 axis.
Humidity : 90% to 96%
Temperature : -10℃ to 65℃
Time : 480 hours(20 Cycles)
Temperature : -40℃ to +80℃, 100 cycles
500 hours at 85℃.
500 hours at -40℃.
48 hours in a 5% concentration of salt mist
1)Attenuation and return loss shall be satisfied
before and after the test.
2)N o b r e a k a g e , c r a c k o r l o o s e n e s s o n
components.
1)Attenuation and return loss shall be satisfied
before and after the test.
2)N o b r e a k a g e , c r a c k o r l o o s e n e s s o n
components.
No significant corrosion.
Material
Zinc alloy
Zirconia
Zirconia
80
Share Link: 