MASWSS0143 View Datasheet(PDF) - M/A-COM Technology Solutions, Inc.
Part Name
Description
Manufacturer
MASWSS0143
M/A-COM Technology Solutions, Inc.
MASWSS0143 Datasheet PDF : 3 Pages
| |||
MASWSS0143
3 Watt Cellular T/R and Antenna Changeover Switch
DC - 3.0 GHz
Electrical Specifications: TA = 25°C, VCTL = 0/5 V, Pin = 30 dBm, Z0 = 50 Ω 4
Parameters
Test Conditions
Units
Min.
Typ.
Insertion Loss
DC - 1 GHz
1 - 2 GHz
2 - 3 GHz
dB
—
0.35
dB
—
0.40
dB
—
0.65
Isolation
DC - 1 GHz
1 - 2 GHz
2 - 3 GHz
dB
18
22
dB
—
16
dB
—
11
VSWR
DC - 3 GHz
Ratio
—
1.2:1
P1dB
1 GHz
dBm
—
36
IP2
IP3
2nd Harmonics
3rd Harmonics
Trise, Tfall
Ton, Toff
Transients
2-Tone, 5 MHz Spacing, 1 GHz
Pin = +10 dBm / Tone
dBm
—
110
2-Tone, 5 MHz Spacing, 1 GHz
Pin = +10 dBm / Tone
dBm
—
58
Pin = +30 dBm, f0 = 1 GHz
Pin = +30 dBm, f0 = 1 GHz
10% to 90% RF, 90% to 10% RF
dBc
—
-78
dBc
—
-82
nS
—
60
50% control to 90% RF, 50% control to 10% RF
nS
—
20
mV
—
20
Control Current
VCTL = 5 V
μA
—
5
4. For positive voltage control, external DC blocking capacitors are required on all RF ports.
Rev. V4
Max.
0.50
—
—
—
—
—
—
—
—
—
—
-70
—
—
—
20
Truth Table 5,6
Control A Control B RFC - RF1 RFC - RF2
0
1
Off
On
1
0
On
Off
5. Differential voltage, V (state 1) - V (state 0), must be +2.5 V
minimum and must not exceed 8 V.
6. 0 = -8 V to 0 V, 1 = -5.5 V to 8.0 V
Lead-Free SOT-26†
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
† Reference Application Note M538 for lead-free solder reflow
recommendations.
2
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 / Fax: 978.366.2266
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macomtech.com for additional data sheets and product information.
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
Share Link: 