Electrical and Thermal Characteristics
Table 5. Power Consumption
Mode
SYSCLK/Core
33/66 MHz
SYSCLK/Core
33/83.3 MHz
Unit
Full-On
Typical
1.2
2.2
W
Maximum
1.4
2.4
W
Doze
Typical
1.0
1.1
W
Maximum
1.2
1.4
W
Nap
Typical
1.0
1.1
W
Maximum
1.2
1.4
W
Sleep
Typical
260
330
mW
Maximum
360
450
mW
Suspend
Typical
140
220
mW
Maximum
190
270
mW
Notes:
• Power consumption for common system configurations assuming 50 pF loads
• Suspend power-saving mode assumes SYSCLK off and PLL in bypass mode.
• Typical power is an average value measured at Vdd = AVdd = 3.30 V and TA = 25 °C.
• Maximum power is measured at Vdd = AVdd = 3.45 V and TA = 25 °C.
1.4.2 AC Electrical Characteristics
This section provides AC electrical characteristics for the 106. After fabrication, parts are sorted by
maximum 60x processor bus frequency, as shown in Section 1.4.2.1, “Clock AC Specifications,” and tested
for conformance to the AC specifications for that frequency. These specifications are for operation between
16.67 and 33.33 MHz PCI bus (SYSCLK) frequencies. The 60x processor bus frequency is determined by
the PCI bus (SYSCLK) frequency and the settings of the PLL[0–3] signals. All timings are specified
relative to the rising edge of SYSCLK.
1.4.2.1 Clock AC Specifications
Table 6 provides the clock AC timing specifications as shown in Figure 2, and assumes Vdd = AVdd = 3.3
± 5% V DC, GND = 0 V DC, and 0 ≤ Tj ≤ 105 °C.
MPC106 PCI Bridge/Memory Controller Hardware Specifications
7