S6B0796 View Datasheet(PDF) - Samsung

Part Name

Description

Manufacturer

S6B0796

240 SEG / COM DRIVER FOR STN LCD

Samsung 

S6B0796 PRELIMINARY SPEC. VER. 1.0

240 SEG / COM DRIVER FOR STN LCD

Common Mode

Symbol

VDD

VSS

V0R, V0L

V12R , V12L

V43R , V43L

V5R , V5L

EIO1

EIO2

LP

L/R

Function

Logic system power supply pin connects to +2.4 to +5.5V

Ground pin connects to 0 V

Power supply pin for LC driver voltage bias.

. Normally, the bias voltage used is set by a resistor divider.

. Ensure that voltage are set such that VSS<V43<V12<V0.

. To further reduce the difference between the output waveforms of LC driver

output pins Y1 and Y240, externally connect ViR and ViL(i=0, 12, 43, 5)

Bidirectional shift register shift data input/output pin

. Output pin when L/R is at VSS level “L”, input pin when L/R is at VDD level

“H”.

. When EIO1 is used as input pin, it will be pull-down.

. When EIO1 is used as output pin, it won’t be pull-down.

Bidirectional shift register shift data input/output pin

. Input pin when L/R is at VSS level “L”, output pin when L/R is at VDD level

“H”.

. When EIO2 is used as input pin, it will be pull-down.

. When EIO2 is used as output pin, it won’t be pull-down.

Bidirectional shift register shift clock pulse input pin

. Data is shifted on the falling edge of the clock pulse.

Bidirectional shift register shift direction selection pin

. Data is shifted from Y240 to Y1 when set to VSS to level “L”, and data is

shifted from Y1 to Y240 when set to VDD level “H”.

13

Share Link: