SSM2412 View Datasheet(PDF) - Analog Devices
Part Name
Description
Manufacturer
SSM2412 Datasheet PDF : 12 Pages
| |||
SSM2402/SSM2412–SPECIFICATIONS
ELECTRICAL CHARACTERISTICS (@ VS = ؎18 V, RL = OPEN, and –40؇C ≤ TA ≤ +85؇C unless otherwise noted.
All specifications, tables, graphs, and application data apply to both the SSM2402 and SSM2412, unless otherwise noted.)
Parameter
Symbol
Conditions
SSM2402/SSM2412
Min Typ Max Units
POSITIVE SUPPLY CURRENT
NEGATIVE SUPPLY CURRENT
GROUND CURRENT
DIGITAL INPUT HIGH
DIGITAL INPUT LOW
LOGIC INPUT CURRENT
ANALOG VOLTAGE RANGE3
ANALOG CURRENT RANGE3
OVERVOLTAGE INPUT CURRENT
SWITCH ON RESISTANCE
+ISY
–ISY
IGND
VINH
VINL
ILOGIC
VANALOG
IANALOG
RON
RON MATCH
RON MATCH
SWITCH ON LEAKAGE CURRENT IS(ON)
SWITCH OFF LEAKAGE CURRENT IS(OFF)
TURN-ON TIME4
TURN-OFF TIME5
BREAK-BEFORE-MAKE
TIME DELAY6
CHARGE INJECTION
tON
tOFF
tOFF–tON
Q
VIL = 0.8 V, 2.0 V1
VIL = 0.8 V, 2.0 V1
VIL = 0.8 V, 2.0 V1
TA = Full Temperature Range
TA = Full Temperature Range
VIN = 0 V to 15 V2
VIN = ± VSUPPLY
–14.2 V ≤ VA ≤ +14.2 V
IA = ± 10 mA, VIL = 2.0 V
TA = +25°C
TA = Full Temperature Range
Tempco (∆RON/∆T)
–14.2 V ≤ VA ≤ +14.2 V
IA = ± 10 mA, VIL = 2.0 V
VIL = 2.0 V
–14.2 V ≤ VA ≤ +14.2 V
VA = 0 V
VIL = 0.8 V
–14.2 V ≤ VA ≤ +14.2 V
VA = 0 V
VA = +10 V, RL = 2 kΩ
TA = +25°C, See Test Circuit
VA = +10 V, RL = 2 kΩ
TA = +25°C, See Test Circuit
TA = +25°C
TA = +25°C
SSM2402
SSM2412
SSM2402
SSM2412
SSM2402
SSM2412
SSM2402
SSM2412
6.0
4.8
0.6
20
1.0
–14.2
–10
± 40
7.5 mA
6.0 mA
1.5 mA
V
0.8 V
5.0 µA
+14.2 V
+10 mA
mA
60 85 Ω
115 Ω
0.2
Ω/°C
15
%
0.05 1.0 µA
0.05 10.0 nA
0.05 1.0 µA
0.05 10.0 nA
10.0
ms
3.5
4.0
ms
1.5
6.0
ms
2.0
50
pC
150
ON-STATE INPUT
CAPACITANCE
CS(ON)
VA = 1 V rms
f = 5 kHz, TA = +25°C
OFF-STATE INPUT
CAPACITANCE
CS(OFF)
VA = 1 V rms
f = 5 kHz, TA = +25°C
OFF ISOLATION
ISO(OFF)
VA = 10 V rms, 20 Hz to 20 kHz
TA = +25°C, See Test Circuit
CHANNEL-TO-CHANNEL
CT
CROSSTALK
VA = 10 V rms, 20 Hz to 20 kHz
TA = +25°C
TOTAL HARMONIC
DISTORTION7
THD
0 V to 10 V rms, 20 Hz to 20 kHz
TA = +25°C, RL = 5 kΩ
SPECTRAL NOISE DENSITY
en
20 Hz to 20 kHz, TA = +25°C
WIDEBAND NOISE DENSITY
en p-p
20 Hz to 20 kHz, TA = +25°C
NOTES
1“VIL” is the Logic Control Input.
2Current tested at VIN = 0 V. This is the worst case condition.
3Guaranteed by RON test condition.
4Turn-ON time is measured from the time the logic input reaches the 50% point to the time the output reaches 50% of the final value.
5Turn-OFF time is measured from the time the logic input reaches the 50% point to the time the output reaches 50% of the initial value.
6Switch is guaranteed by design to provide break-before-make operation.
7THD guaranteed by design and dynamic RON testing.
Specifications subject to change without notice.
12
pF
4
pF
120
dB
96
dB
0.003 0.01 %
1
nV/√Hz
0.2
µV p-p
–2–
REV. A
Share Link: 