MKP1848645704Y View Datasheet(PDF) - Vishay Semiconductors
Part Name
Description
Manufacturer
MKP1848645704Y Datasheet PDF : 20 Pages
| |||
www.vishay.com
MKP1848 DC-Link
Vishay Roederstein
For the minimum product dimensions for length (lmin.), width (wmin.), and height (hmin.) following tolerances of the components
are valid:
lmin. = l - l, wmin. = w - w, and hmin. = h - h following
• For products with 15 mm < pitch 22.5 mm, l = 1.0 mm, and w = h = 0.5 mm
• For products with pitch = 27.5 mm, l = 1.5 mm, and w = h = 0.5 mm
• For products with pitch = 37.5 mm, l = 1.5 mm, and w = h = 1.0 mm
• For products with pitch = 52.5 mm, l = 1.5 mm, and w = h = 1.0 mm
For 4 pins, 6 pins, and 12 pins:
Wmax.
P2
2 x P2 ± 0.5 mm
3 x P2 ± 0.5 mm
4 x P2 ± 0.5 mm
P1
5 x P2 ± 0.5 mm
Lmax.
ØD
P1 (mm)
27.5
37.5
52.5
Lmax. (mm)
l + 1.6
l + 2.0
l + 2.4
Wmax. (mm)
w + 2.0
w + 3.0
w + 4.0
Ø D (mm)
1.2
1.5
1.7
H (mm)
h + 0.2
h + 0.5
h + 0.5
SOLDERING CONDITIONS
For general soldering conditions and wave soldering profile, we refer to the application note:
“Soldering Guidelines for Film Capacitors”: www.vishay.com/doc?28171
Storage Temperature
Tstg = -25 °C to +35 °C with RH maximum 75 % without condensation.
Ratings and Characteristics Reference Conditions
Unless otherwise specified, all electrical values apply to an ambient temperature of 23 °C ± 1 °C, an atmospheric pressure of
86 kPa to 106 kPa and a relative humidity of 50 % ± 2 %.
For reference testing, a conditioning period shall be applied over 96 h ± 4 h by heating the products in a circulating air oven at
the rated temperature and a relative humidity not exceeding 20 %.
Revision: 25-Oct-17
12
Document Number: 28164
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Share Link: 