STR-W6753
Quasi-Resonant Topology
Primary Switching Regulators
Features and Benefits (continued)
▫ Pulse-by-pulse drain overcurrent limiting
▫ Overvoltage protection (bias winding voltage sensing),
with latch
▫ Overload protection with latch
▫ Maximum on-time limit
Selection Guide
Part Number
STR-W6753
Package
TO-220
Description (continued)
diodes during the start-up sequence. Various protections such as
overvoltage, overload, overcurrent, maximum on-time protections
and avalanche-energy-guaranteed MOSFET secure good system-
level reliability.
Applications include the following:
▪ Set Top Box
▪ LCD PC monitor, LCD TV
▪ Printer, Scanner
▪ SMPS power supplies
Absolute Maximum Ratings at TA = 25°C
Parameter
Symbol
Conditions
Drain Current1
Maximum Switching Current2
Single Pulse Avalanche Energy3
Input Voltage for Controller (MIC)
SS/OLP Terminal Voltage
IDpeak
IDmax
EAS
VCC
VSSOLP
Single pulse
TA = –20°C to 125°C
Single pulse, VDD = 99 V, L = 20 mH, ILpeak = 3.6 A
FB Terminal Inflow Current
IFB
FB Terminal Voltage
VFB IFB within the limits of IFB
OCP/BD Terminal Voltage
MOSFET Power Dissipation4
VOCPBD
PD1
With infinite heatsink
Without heatsink
Controller (MIC) Power Dissipation
PD2
VCC × ICC
Operating Internal Leadframe Temperature
Operating Ambient Temperature
TF Recommended operation temperature, see cautions
TOP
Storage Temperature
Tstg
Channel Temperature
Tch
1Refer to figure 2
2IDMAX is the drain current determined by the drive voltage of the IC and the threshold voltage, Vth, of the MOSFET
3Refer to figure 3
4Refer to figure 5
Rating
Unit
11.2
A
11.2
A
145
mJ
35
V
–0.5 to 6.0 V
10
mA
–0.5 to 9.0 V
–1.5 to 5.0 V
26.0
W
1.3
W
0.8
W
–20 to 115 °C
–20 to 115 °C
–40 to 125 °C
150
°C
All performance characteristics given are typical values for circuit or
system baseline design only and are at the nominal operating voltage and
an ambient temperature, TA, of 25°C, unless otherwise stated.
28103.31
2
SANKEN ELECTRIC CO., LTD.