AZ732-08-2 View Datasheet(PDF) - American Zettler, Inc.

Part Name

Description

Manufacturer

AZ732-08-2

MINIATURE POWER RELAY

American Zettler, Inc. 

AZ732

MINIATURE

POWER RELAY

FEATURES

• Dielectric strength 4000 Vrms coil to contact

• Isolation spacing greater than 8 mm

• Approvals/Standards include: UL, VDE, IEC, SEMKO,

CEE

• Double pole — Forms A, B, C, available

• 10 Amp switching

• SLIMPAK™ version saves board space

• Epoxy sealed version for automatic wave soldering and

cleaning

• UL, CUR file E44211; VDE 4120–4940–4002/A1

CONTACTS

Arrangement

Ratings

Material

Resistance

DPDT (2 Form C)

Resistive load:

Max. switched power: 300 W or 2770 VA

Max. switched current: 10 A, 51 A for 2 ms

Max. switched voltage: 150* VDC or 400 VAC

UL Rating:10 A at 30 VDC or 277 VAC

1/8 HP 120 VAC motor load

*Note: If switching voltage is greater than 30 VDC, special

precautions must be taken. Please contact the factory.

Silver cadmium oxide

< 30 milliohms initially

(at rated current, voltage drop method)

COIL

Power

At Pickup Voltage

(typical)

Max. Continuous

Dissipation

Temperature Rise

Temperature

Standard coil: 337 mW

Sensitive coil: 250 mW

1.9 W at 20°C (68°F) ambient

1.4 W at 40°C (104°F) ambient

Standard: 40°C (72°F) at nominal coil

voltage

Sensitive: 32°C (58°F) at nominal coil

voltage

Max. 110°C (230°F)

NOTES

1. All values at 20°C (68°F).

2. Relay may pull in with less than “Must Operate” value.

3. Unsealed relays should not be dip cleaned.

4. Specifications subject to change without notice.

GENERAL DATA

Life Expectancy

Mechanical

Electrical

Minimum operations

30 million

1 x 105 at 10 A 30 VDC

1 x 105 at 10 A 115 VAC

Operate Time (typical) 7 ms at nominal coil voltage

Release Time (typical) 2 ms at nominal coil voltage

(with no coil suppression)

Dielectric Strength

4000 Vrms contacts to coil

(at sea level for 1 min.) 2500 Vrms contact to contact

1000 Vrms between open contacts

Insulation

Resistance

10,000 megohms min. at 20°C, 500 VDC,

50% RH

Dropout

Greater than 10% of nominal coil voltage

Ambient Temperature

Operating

Storage

At nominal coil voltage

Standard: -55°C (-67°F) to 70°C (158°F)

Sensitive: -55°C (-67°F) to 80°C (176°F)

Both: -55°C (-67°F) to 110°C (230°F)

Vibration

0.062" DA at 10–55 Hz

Shock

20 g

Enclosure

P.B.T. polyester

Terminals

Tinned copper alloy, P.C.

Max. Solder Temp.

270°C (518°F)

Max. Solder Time

5 seconds

Max. Solvent Temp. 80°C (176°F)

Max. Immersion Time 30 seconds

Weight

20 grams

7/26/02W

Share Link: