50S116T
SDRAM
1. GENERAL DESCRIPTION
50S116T is a high-speed synchronous dynamic random access memory (SDRAM), organized as
512K words × 2 banks × 16 bits. Using pipelined architecture 50S116T delivers a data
bandwidth of up to 400M bytes per second (-5). For different applications the 50S116T is
sorted into the following speed grades: -5, -6, -7. The -5 parts can run up to 200MHz/CL3.
The -6 parts can run up to 166 MHz/CL3. The -7 parts can run up to 143 MHz/CL3. For
handheld device application.
Accesses to the SDRAM are burst oriented. Consecutive memory location in one page can be
accessed at a burst length of 1, 2, 4, 8 or full page when a bank and row is selected by an ACTIVE
command. Column addresses are automatically generated by the SDRAM internal counter in burst
operation. Random column read is also possible by providing its address at each clock cycle. The
multiple bank nature enables interleaving among internal banks to hide the precharging time.
By having a programmable Mode Register, the system can change burst length, latency cycle,
interleave or sequential burst to maximize its performance. 50S116T is ideal for main memory in
high performance applications.
2. FEATURES
• 3.3V ±0.3V power supply
• Up to 200 MHz clock frequency
• 524,288 words x 2 banks x 16 bits organization
• CAS latency: 2 and 3
• Burst Length: 1, 2, 4, 8, and full page
• Burst read, Single Write Mode
• Byte data controlled by UDQM and LDQM
• Auto precharge and controlled precharge
• 4K refresh cycles/64 mS
• Interface: LVTTL
• Packaged in 50-pin, 400 mil TSOP II
3. AVAILABLE PART NUMBER
PART NUMBER
50S116T-5
50S116T-6
SPEED (CL = 3 )
200 MHz
166 MHz
50S116T-7
143 MHz
SELF REFRESH CURRENT(MAX.)
1 mA
1 mA
1 mA
* All specs and applications shown above subject to change without prior notice.
1F-5 NO.66 SEC.2 NAN-KAN RD ., LUCHU , TAOYUAN, TAIWAN, R.O.C
Tel:886-3-3214525
Fax:886-3-3521052
Page 3 of 42
Email: server@ceramate.com.tw
Http: www.ceramate.com.tw
Rev 1.0 Aug.20,2002