TSC1031IYPT View Datasheet(PDF) - STMicroelectronics

Part Name

Description

Manufacturer

TSC1031IYPT

High-voltage, high-side current sense amplifier

STMicroelectronics 

Absolute maximum ratings and operating conditions

TSC1031

2

Absolute maximum ratings and operating conditions

Symbol

Table 2. Absolute maximum ratings

Parameter

Value

Unit

Vid

Vin_sense

Vin_sel

Vin_A1

Vcc+

Vcc+-Vcc-

Vout

Tstg

Tj

Rthja

ESD

Input pins differential voltage (Vp-Vm)

Sensing pins input voltages (Vp, Vm)(1)

Gain selection pin input voltage (SEL)(2)

A1 pin input voltage(2)

Positive supply voltage(2)

DC supply voltage

DC output pin voltage(2)

Storage temperature

Maximum junction temperature

TSSOP8 thermal resistance junction to ambient

SO-8 thermal resistance junction to ambient

HBM: human body model(3)

MM: machine model(4)

CDM: charged device model(5)

±20

-16 to 75

-0.3 to Vcc++0.3

-0.3 to Vcc++0.3

-0.3 to 7

0 to 15

-0.3 to Vcc++0.3

-55 to 150

150

120

125

2.5

150

1.5

V

V

V

V

V

V

V

°C

°C

C/W

°C/W

kV

V

kV

1. These voltage values are measured with respect to the Vcc- pin.

2. These voltage values are measured with respect to the Gnd pin.

3. Human body model: a 100 pF capacitor is charged to the specified voltage, then discharged through a

1.5 kresistor between two pins of the device. This is done for all couples of connected pin combinations

while the other pins are floating.

4. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between

two pins of the device with no external series resistor (internal resistor < 5 ). This is done for all couples of

connected pin combinations while the other pins are floating.

5. Charged device model: all pins plus package are charged together to the specified voltage and then

discharged directly to ground.

Symbol

Table 3. Operating conditions

Parameter

Value

Unit

DC supply voltage in single-supply configuration

Vcc+

from Tmin to Tmax

(Vcc- connected to Gnd = 0 V)

2.7 to 5.5

V

Negative supply voltage in dual-supply

configuration from Tmin to Tmax

Vcc-

Vcc+ = 5.5 V max

-8 to 0

V

Vcc+ = 3 V max

-11 to 0

V

Vicm

Common-mode voltage range referred to pin Vcc -

(Tmin to Tmax)

2.9 to 70

V

Toper

Operational temperature range (Tmin to Tmax)

-40 to 125

°C

6/26

DocID016875 Rev 3

Share Link: