R5F212ACSNFA View Datasheet(PDF) - Renesas Electronics

Part Name

Description

Manufacturer

R5F212ACSNFA

R8C/2A Group, R8C/2B Group RENESAS MCU

Renesas Electronics 

R8C/2A Group, R8C/2B Group

2. Central Processing Unit (CPU)

2.8.7 Interrupt Enable Flag (I)

The I flag enables maskable interrupts.

Interrupt are disabled when the I flag is set to 0, and are enabled when the I flag is set to 1. The I flag is set to 0

when an interrupt request is acknowledged.

2.8.8 Stack Pointer Select Flag (U)

ISP is selected when the U flag is set to 0; USP is selected when the U flag is set to 1.

The U flag is set to 0 when a hardware interrupt request is acknowledged or the INT instruction of software

interrupt numbers 0 to 31 is executed.

2.8.9 Processor Interrupt Priority Level (IPL)

IPL is 3 bits wide and assigns processor interrupt priority levels from level 0 to level 7.

If a requested interrupt has higher priority than IPL, the interrupt is enabled.

2.8.10 Reserved Bit

If necessary, set to 0. When read, the content is undefined.

Rev.2.10 Nov 26, 2007 Page 19 of 60

REJ03B0182-0210

Share Link: