MK22FN128VDC10 View Datasheet(PDF) - NXP Semiconductors.

Part Name

Description

Manufacturer

MK22FN128VDC10

Kinetis K22F 128KB Flash 100 MHz Cortex-M4 Based Microcontroller with FPU

NXP Semiconductors. 

NXP Semiconductors

Data Sheet: Technical Data

K22P121M100SF9

Rev. 7, 08/2016

Kinetis K22F 128KB Flash

100 MHz ARM® Cortex®-M4 Based Microcontroller with FPU

The Kinetis K22 product family members are optimized for cost-

sensitive applications requiring low-power, USB connectivity,

high peripheral integration and processing efficiency with a

floating-point unit. These devices share the comprehensive

enablement and scalability of the Kinetis family.

This product offers:

• Run power consumption down to 120 μA/MHz. Static

power consumption down to 2.6 μA with full state retention

and 6 μs wakeup. Lowest static mode down to 120 nA.

• USB LS/FS OTG 2.0 with embedded 3.3 V, USB FS device

crystal-less functionality.

MK22FN128VDC10

MK22FN128VLL10

MK22FN128VMP10

MK22FN128VLH10

121 XFBGA (DC)

100 LQFP (LL)

8 x 8 x 0.5 Pitch 0.65 14 x 14 x 1.4 Pitch 0.5

mm

mm

64 MAPBGA (MP)

5 x 5 x 1.2 Pitch 0.5

mm

64 LQFP (LH)

10 x 10 x 1.4 Pitch 0.5

mm

Performance

Analog modules

• 100 MHz ARM Cortex-M4 core with DSP instructions

• Two 16-bit SAR ADCs (1.2 MS/s in 12bit mode)

delivering 1.25 Dhrystone MIPS per MHz

• One 12-bit DAC

• Two analog comparators (CMP) with 6-bit DAC

Memories and memory interfaces

• Accurate internal voltage reference

• 128 KB of embedded flash and 24 KB of RAM

• Serial programming interface(EzPort)

Communication interfaces

• Pre-programmed Kinetis flashloader for one-time, in-

• USB LS/FS OTG 2.0 with on-chip transceiver

system factory programming

• USB full-speed device crystal-less operation

System peripherals

• Two SPI modules

• Three UART modules and one low-power UART

• Flexible low-power modes, multiple wakeup sources

• Two I2C: Support for up to 1 Mbps operation

• 4-channel DMA controller

• I2S module

• Independent External and Software Watchdog monitor

Clocks

Timers

• One 8-channel general-purpose/PWM timer

• Two crystal oscillators: 32 kHz (RTC) and 32-40 kHz or • Two 2-channel general-purpose timers with

3-32 MHz

quadrature decoder functionality

• Three internal oscillators: 32 kHz, 4 MHz, and 48 MHz

• Periodic interrupt timers

• Multi-purpose clock generator with FLL

• 16-bit low-power timer

Security and integrity modules

• Hardware CRC module

• Real-time clock with independent power domain

• Programmable delay block

• 128-bit unique identification (ID) number per chip

Operating Characteristics

• Flash access control to protect proprietary software

• Voltage range (including flash writes): 1.71 to 3.6 V

Human-machine interface

• Temperature range (ambient): -40 to 105°C

• Up to 67 general-purpose I/O (GPIO)

NXP reserves the right to change the production detail specifications as may be

required to permit improvements in the design of its products.

Share Link: