CLM4121 Ver la hoja de datos (PDF) - Calogic, LLC
Número de pieza
componentes Descripción
Fabricante
CLM4121 Datasheet PDF : 6 Pages
| |||
CORPORATION
CLM4121 / CLM4321
AC ELECTRICAL CHARACTERISTICS
The following specifications
Boldface limits apply for TA
apply for Supply Voltage = ±15V, VCM
= TJ = TMIN to TMAX; all other limits TA
=
=
0T,JR=L2≥51oC00. KΩ
and
RS
=
50Ω
unless
otherwise
noted.
SYMBOL
CHARACTERISTICS
CLM4121
TYP
CLM4321
UNITS
Limit (Note 5) Limit (Note 5)
CONDITIONS
SR1
Slew Rate 1
SR2
Slew Rate 2
4000
2000
3500
1500
2500
1000
V/µs
VIN = ±11V, RL = 1KΩ (Note 2)
VIN = ±5V, RL = 50Ω (Note 2)
SSBW
Small Signal Bandwidth
180
140
100
VIN = ±100mVPP, RL = 50Ω
CL ≤ 10pF
LSBW
Large Signal Bandwidth
65
55
40
MHz
VIN = ±11V, RL = 1K
CL ≤ 10pF
PBW
Power Bandwidth
40
30
20
VIN = ±8V, RL = 50Ω
CL ≤ 10pF
tr, tf
Rise Time
Fall Time
2.0
2.5
3.5
ns
RL = 50Ω, CL ≤ 10pF
VO = 100mVPP
t pd
Propagation Delay Time
3.0
ns
RL = 50Ω, CL ≤ 10pF
VO = 100mVPP
OS
Overshoot
10
%
RL = 50Ω, CL ≤ 10pF
VO = 100mVPP
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. DC and AC electrical specifications do not
apply when operating the device beyond its rated operating conditions.
Note 2: Slew rate is measured with 50Ω source impedance at 25oC. For accurate measurements, the input slew rate should be at least
5000V/µs.
Note 3: The test circuit consists of the human body model of 120pF in series with 1500Ω.
Note 4: The maximum power dissipation is a function of TJ(max), θJA and TA. The maximum allowable power dissipation at any ambient
temperature is PD = (TJ(max) - TA)/θJA.
Note 5: Limits are guaranteed by testing, correlation or periodic characterization.
Note 6: For M & N package, θJA is measured by soldering the unit directly on a printed circuit board and V- pins are connected to 2 square
inches of 2 oz copper.
CALOGIC CORPORATION, 237 Whitney Place, Fremont, California 94539, Telephone: 510-656-2900, FAX: 510-651-1076
Share Link: 