M61311SP Ver la hoja de datos (PDF) - Renesas Electronics
Número de pieza
componentes Descripción
Fabricante
M61311SP Datasheet PDF : 27 Pages
| |||
M61311SP/M61316SP
ABL1 ABL Control Characteristics1
Measure the amplitude output at OUT (26, 28, 30). The amplitude is called VOUT (26, 28, 30).
The measured value is ABL1.
∆ABL1 ABL Control Relative Characteristics1
Relative characteristics ∆ABL1 is calculated by the equation below:
∆ABL1 = VOUT (26) / VOUT (28),
VOUT (28) / VOUT (30),
VOUT (30) / VOUT (26)
ABL2 ABL Control Characteristics2
Measuring condition and procedure are the same as described in ABL1.
∆ABL2 ABL Control Relative Characteristics2
Measuring condition and procedure are the same as described in ∆ABL1.
ABL3 ABL Control Characteristics3
Measuring condition and procedure are the same as described in ABL1.
∆ABL3 ABL Control Relative Characteristics3
Relative characteristics ∆ABL3 is calculated by the equation below:
∆ABL3 = VOUT (26) − VOUT (28),
VOUT (28) − VOUT (30),
VOUT (30) − VOUT (26)
VB1 Brightness Control Characteristics1
Measure the DC voltage at OUT (26, 28, 30). The amplitude is called VOUT (26, 28, 30).
The measured value is called VB1.
∆VB1 Brightness Control Relative Characteristics1
Relative characteristics ∆VB1 is calculated by the equation below:
∆VB1 = VOUT (26) − VOUT (28),
VOUT (28) − VOUT (30),
VOUT (30) − VOUT (26)
VB2 Brightness Control Characteristics2
Measuring condition and procedure are the same as described in VB1.
∆VB2 Brightness Control Relative Characteristics2
Measuring condition and procedure are the same as described in ∆VB1.
VB3 Brightness Control Characteristics3
Measuring condition and procedure are the same as described in VB1.
∆VB3 Brightness Control Relative Characteristics3
Measuring condition and procedure are the same as described in ∆VB1.
REJ03F0199-0201 Rev.2.01 Mar 31, 2008
Page 11 of 26
Share Link: 