M61316SP Ver la hoja de datos (PDF) - Renesas Electronics

Número de pieza

componentes Descripción

Fabricante

M61316SP

l2C BUS Controlled Video Pre-amp for High Resolution Color Display

Renesas Electronics 

M61311SP/M61316SP

VD-NV V-DET Input Maximum Noise Voltage

Increase the SG1 input level gradually from 0 VP-P to 0.05 VP-P. No pulse Video Det OUT permitted.

VD-SV V-DET Minimum Input Voltage

Decrease the SG1 input level gradually from 0.2 VP-P to 0.3 VP-P. Positive pulse has occurred to Video Det OUT.

VVDH V-DET Output High Level

Measure the high voltage at Video Det OUT. The measured value is treated as VVDH.

VVDL V-DET Output Low Level

Measure the low voltage at Video Det OUT. The measured value is treated as VVDL.

TDV-F V-DET Output Delay Time1

Video Det OUT becomes high with signal part of SG1.

Measure the time needed for the SG1 to fall from 50% and for Video Det OUT to fall from 50% with an active probe.

The measured value is called TDV-F.

TDV-R V-DET Output Delay Time2

Video Det OUT becomes high with signal part of SG1.

Measure the time needed for the SG1 to rise from 50% and for Video Det OUT to rise from 50% with an active probe.

The measured value is called TDV-R.

SG1 Video (50%)

Video Det OUT

TDV-R

(50%)

Pedestal voltage

TDV-F

REJ03F0199-0201 Rev.2.01 Mar 31, 2008

Page 15 of 26

Share Link: