S6B0715
33 COM / 100 SEG DRIVER & CONTROLLER FOR STN LCD
INTRODUCTION
The S6B0715 is a driver & controller LSI for graphic dot-matrix liquid crystal display systems. It contains 33 common
and 100 segment driver circuits. This chip is connected directly to a microprocessor, accepts serial or 8-bit parallel
display data and stores in an on-chip display data RAM of 65 x 132 bits. It provides a highly-flexible display section
due to 1-to-1 correspondence between on-chip display data RAM bits and LCD panel pixels. And it performs display
data RAM read/write operation with no external operating clock to minimize power consumption. In addition,
because it contains power supply circuits necessary to drive liquid crystal, it is possible to make a display system
with the fewest components.
FEATURES
Driver Output Circuits
− 33 common outputs / 100 segment outputs
On-chip Display Data RAM
− Capacity: 65 x 132 = 8,580 bits
− Bit data "1": a dot of display is illuminated.
− Bit data "0": a dot of display is not illuminated.
Multi-chip Operation (Master, Slave) Available
Applicable Duty Ratios
Duty ratio
1/33
Applicable LCD bias
1/5 or 1/6
Maximum display area
33 × 100
Microprocessor Interface
− 8-bit parallel bi-directional interface with 6800-series or 8080-series
− Serial interface (only write operation) available
Various Instruction Setting
On-chip Low Power Analog Circuit
− On-chip oscillator circuit
− Voltage converter (x2, x3 and x4)
− Voltage regulator (temperature coefficient: -0.05%/°C, -0.2%/°C)
− On-chip electronic contrast control function (32 steps)
− Voltage follower (LCD bias: 1/5 or 1/6)
Operating Voltage Range
− Supply voltage (VDD): 2.4 to 3.6 V
− LCD driving voltage (VLCD = V0 - VSS): 4.0 to 15.0 V
Low Power Consumption
− 100 µΑ Typ. (VDD = 3V, x4 boosting, V0 = 8V, internal power supply ON and display OFF)
− 10 µΑ Max. (during power save [standby] mode)
Wide Operating Temperature Range
− Ta = -40°C to +85°C
Package Type
− Gold bumped chip or TCP
1