ADL5501 Ver la hoja de datos (PDF) - Analog Devices
Número de pieza
componentes Descripción
Fabricante
ADL5501 Datasheet PDF : 28 Pages
| |||
FEATURES
True rms response
Excellent temperature stability
Up to 30 dB input dynamic range
50 Ω input impedance
1.25 V rms, 15 dBm, maximum input
Single-supply operation: 2.7 V to 5.5 V
Low power: 3.3 mW at 3 V supply
RoHS-compliant
APPLICATIONS
Measurement of CDMA-, CDMA2000-, W-CDMA-, and QPSK-/
QAM-based OFDM, and other complex modulation
waveforms
RF transmitter or receiver power measurement
GENERAL DESCRIPTION
The ADL5501 is a mean-responding TruPwr™ power detector
for use in high frequency receiver and transmitter signal chains
from 50 MHz to 6 GHz. It is easy to apply, requiring only a single
supply between 2.7 V and 5.5 V and a power supply decoupling
capacitor. The input is internally ac-coupled and has a nominal
input impedance of 50 Ω. The output is a linear-responding dc
voltage with a conversion gain of 6.3 V/V rms at 900 MHz.
The ADL5501 is intended for true power measurement of simple
and complex waveforms. The device is particularly useful for
measuring high crest factor (high peak-to-rms ratio) signals,
such as CDMA-, CDMA2000-, W-CDMA-, and QPSK-/QAM-
based OFDM waveforms. The on-chip modulation filter provides
adequate averaging for most waveforms.
50 MHz to 6 GHz
TruPwr Detector
ADL5501
5
1
0.1
0.03
–25 –20 –15 –10 –5
0
INPUT (dBm)
5
10
15
Figure 1. Output vs. Input Level, Supply = 3 V, Frequency = 1.9 GHz
The on-chip, 100 Ω series resistance at the output, combined
with an external shunt capacitor, creates a low-pass filter response
that reduces the residual ripple in the dc output voltage. For more
complex waveforms, an external capacitor at the FLTR pin can
be used for supplementary signal demodulation.
The ADL5501 offers excellent temperature stability across a
30 dB range and near 0 dB measurement error across temperature
over the top portion of the dynamic range. In addition to its
temperature stability, the ADL5501 offers low process variations
that further reduce calibration complexity.
The ADL5501 operates from −40°C to +85°C and is available in
a small 6-lead SC-70 package. It is fabricated on a proprietary
high fT silicon bipolar process.
FUNCTIONAL BLOCK DIAGRAM
RFIN
ADL5501
x2 i
TRANS-
CONDICTANCE
CELLS
x2 i
INTERNAL FILTER
CAPACITOR
VPOS
FLTR
ERROR
AMP
BUFFER
VRMS
100Ω
BAND-GAP
REFERENCE
Figure 2.
ENBL
COMM
Rev. B
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2006–2009 Analog Devices, Inc. All rights reserved.
Share Link: 