AZ760 Ver la hoja de datos (PDF) - American Zettler, Inc.

Número de pieza

componentes Descripción

Fabricante

AZ760

20 AMP MINIATURE POWER RELAY

American Zettler, Inc. 

AZ760

20 AMP MINIATURE

POWER RELAY

FEATURES

• Low cost

• 20 Amp switching

• 60 Amp inrush current

• Class B insulation system

• Quick connect terminals

• Flux tight construction

• UL, CUR file E44211

CONTACTS

Arrangement

Ratings

Rated Load

UL, CUR

Material

Resistance

SPST (1 Form A)

Resistive load:

Max. switched power: 600 W or 4400 VA

Max. switched current: 20 A

Max. switched voltage: 150* VDC or 400 VAC

*Note: If switching voltage is greater than 30 VDC, special

precautions must be taken. Please contact the factory.

20 A at 220 VAC, 100k cycles

1.5 HP 250 VAC, 100k cycles

Silver cadmium oxide

< 50 milliohms initially

(24 V, 1 A voltage drop method)

COIL

Power

At Pickup Voltage

(typical)

Max. Continuous

Dissipation

Temperature Rise

Temperature

441 mW

3.0 W at 20°C (68°F) ambient

35°C (63°F) at nominal coil voltage

Max. 130°C (266°F)

NOTES

1. All values at 20°C (68°F).

2. Relay may pull in with less than “Must Operate” value.

3. Specifications subject to change without notice.

GENERAL DATA

Life Expectancy

Mechanical

Electrical

Minimum operations

1 x 107

1 x 105 at 20 A 220 VAC Res.

Operate Time (typical) 15 ms at nominal coil voltage

Release Time (typical) 10 ms at nominal coil voltage

(with no coil suppression)

Dielectric Strength

2000 Vrms coil to contact

(at sea level for 1 min.) 1000 Vrms between open contacts

Insulation

Resistance

1000 megohms min. at 20°C, 500 VDC,

50% RH

Dropout

Greater than 10% of nominal coil voltage

Ambient Temperature At nominal coil voltage

Operating

-40°C (-40°F) to 90°C (194°F)

Storage

-40°C (-40°F) to 130°C (266°F)

Vibration

0.062" DA at 10–55 Hz

Shock

Operating

20 g, 11 ms, 1/2 sine (no false operation)

Non-Operating 100 g, 11 ms, 1/2 sine (no damage)

Enclosure

P.B.T. polyester

Terminals

Max. Solder Temp.

Max. Solder Time

Weight

Tinned copper alloy

P. C. & quick connect

Note: Allow suitable slack on leads when wiring,

and do not subject the terminals to excessive

force.

270°C (518°F)

5 seconds

40 grams

2/703W

Share Link: