G962(2007) Ver la hoja de datos (PDF) - Global Mixed-mode Technology Inc
Número de pieza
componentes Descripción
Fabricante
G962 Datasheet PDF : 1 Pages
| |||
Global Mixed-mode Technology Inc.
G962
2A Low Dropout Regulator with Enable
Features
Adjustable Output from 1.2V to 4.8V Using Ex-
ternal Resistors
1.5V, 1.8V and 2.5V options by Setting ADJ Pin
Below 0.2V
Fixed 2.5V, 3.3V and 5V Output for TO-252
Over current and over temperature protection
500mV dropout @2A
Enable pin
10µA quiescent current in shutdown
Output recovery mode in OTP
Connect ADJ to GND for fixed output mode
TO-252 and TO-252-5 Package
Applications
Battery powered systems
Motherboards
Peripheral cards
Set Top Boxes
Notebook Computers
General Description
The G962 is a high performance positive voltage
regulator designed for use in applications requiring
very low dropout voltage at up to 2 Amps. Since it has
superior dropout characteristics compared to regular
LDOs, it can be used to supply 2.5V on motherboards
or 1.5V, 1.8V on peripheral cards from the 3.3V supply
thus allowing the elimination of costly heatsinks. An
enable pin further reduces power dissipation while
shut down. The G962 provides excellent regulation
over variations in line, load and temperature.
The G962 is available with 1.5V, 1.8V, 2.5V, 3.3V and
5V internally preset outputs.
Ordering Information
ORDER NUMBER
ORDER NUMBER
(Pb free)
G962-25T45U
G962-25T45Uf
G962-33T45U
G962-33T45Uf
G962-50T45U
G962-50T45Uf
G962-15ADJTJU
G962-15ADJTJUf
G962-18ADJTJU
G962-18ADJTJUf
G962-25ADJTJU
G962-25ADJTJUf
Note: T4: TO-252
TJ:TO-252-5
U : Tape & Reel
e.g. 18 denotes the 1.8V output voltage.
Pin Configuration
G962-XXT45
Top View
1
2
3
VIN GND VO
TO-252
MARKING
G962-25
G962-33
G962-50
G962-15
G962-18
G962-25
TEMP. RANGE
-40°C ~ +85°C
-40°C ~ +85°C
-40°C ~ +85°C
-40°C ~ +85°C
-40°C ~ +85°C
-40°C ~ +85°C
PACKAGE
TO-252
TO-252
TO-252
TO-252-5
TO-252-5
TO-252-5
Typical Application Circuit
VEN
VIN
VO
R3
IENH
R1
G962
VEN
VIN
VO
ADJ
GND
C1
4.7µF
C2
10µF
R2
Top View
123 4 5
VEN VIN GND VO ADJ
TO-252-5
Ver: 1.0
Jan 08, 2007
1.2 (R1+R2)
VO =
Volts
R2
R2=12kΩ is recommended
R3 should be connected for current IENH
restriction as VEN > VIN+0.3V
1
TEL: 886-3-5788833
http://www.gmt.com.tw
Share Link: 