LPC1776 Ver la hoja de datos (PDF) - NXP Semiconductors.

Número de pieza

componentes Descripción

Fabricante

LPC1776

32-bit ARM Cortex-M3 microcontroller; up to 512 kB flash and 96 kB SRAM; USB Device/Host/OTG; Ethernet; LCD; EMC

NXP Semiconductors. 

NXP Semiconductors

LPC178x/7x

32-bit ARM Cortex-M3 microcontroller

Table 37. Revision history …continued

Document ID

Release date Data sheet status

Change notice Supersedes

LPC178X_7X v.3

Modifications:

20111220

Objective data sheet

-

LPC178X_7X v.2

• Removed BOOT function from pin P3[14].

• IBAT and IDD(REG)(3V3) updated for Deep power-down mode in Table 13.

• Maximum SDRAM clock of 80 MHz specified in Section 2, Table 18, and Table 19.

• Power consumption data added (Figure 9 and Figure 10).

• Removed parameter ZDRV in Table 13.

• Specified maximum value for parameter CL in Table 33 and remove typical value.

• Specified setting of boost bits in Table 14, Table note 5 and in Table 13, Table note 6 .

• USB connection diagrams updated (Figure 33 to Figure 36).

• Current drain condition on battery supply specified in Section 7.33.6.

• Table note 10 in Table 13 updated.

• ADC characteristics updated (Table 31).

• Section 14.6 “Reset pin configuration for RTC operation” added.

• EEPROM size for parts LPC1774 corrected in Table 2 and Figure 1.

• Changed function LCD_VD[5] on pin P0[10] to Reserved.

• Changed function LCD_VD[10] on pin P0[11] to Reserved.

• Changed function LCD_VD[13] on pin P0[19] to Reserved.

• Changed function LCD_VD[14] on pin P0[20] to Reserved.

• ADC interface model updated (see Table 32 and Figure 30).

LPC178X_7X v.2

Modifications:

20110527

Objective data sheet

-

• Symbol names in Table 3 to Table 5 abbreviated.

• Reserved functions added in Table 3.

• Added function LCD_VD[5] to pin P0[10].

• Added function LCD_VD[10] to pin P0[11].

• Added function LCD_VD[13] to pin P0[19].

• Added function LCD_VD[14] to pin P0[20].

• Added function U4_SCLK to pin P0[21].

• Added function

• Added function MOSI to pin P5[0].

• Added function SSP2_MISO to pin P5[1].

• Added EMC dynamic characteristics.

LPC178X_7X v.1

LPC178X_7X v.1

20110524

Objective data sheet

-

-

LPC178X_7X

Product data sheet

All information provided in this document is subject to legal disclaimers.

Rev. 5.5 — 26 April 2016

© NXP Semiconductors N.V. 2016. All rights reserved.

122 of 126

Share Link: