SMB119NC Ver la hoja de datos (PDF) - Summit Microelectronics
Número de pieza
componentes Descripción
Fabricante
SMB119NC Datasheet PDF : 34 Pages
| |||
SMB119
ABSOLUTE MAXIMUM RATINGS
Temperature Under Bias ...................... -55°C to 125°C
Storage Temperature............................ -65°C to 150°C
Terminal Voltage with Respect to GND:
VBATT............................................. -0.3V to +6.5V
VIN[7:5], LDOIN3............................ -0.3V to +6.5V
All Others ........................................ -0.3V to +6.5V
Output Short Circuit Current ............................... 100mA
Lead Solder Temperature (10 s).......................... 300°C
Junction Temperature.......................…….....…...150°C
ESD Rating per JEDEC…………………....……..2000V
Latch-Up testing per JEDEC………..…....……±100mA
RECOMMENDED OPERATING CONDITIONS
Commercial Temperature Range ................0°C to +70°C
Industrial Temperature Range ................ -40°C to +85°C
VBATT.......................................................+2.7V to +6.0V
VIN[7:5], LDOIN3 ......................................+2.7V to +6.0V
Package Thermal Resistance (θJA)
Die paddle not attached to PCB.......................... 53°C/W
Die paddle attached to PCB............................. 22.9°C/W
Moisture Classification Level 3 (MSL 3) per J-STD- 020
RELIABILITY CHARACTERISTICS
Data Retention ................................................. 100 Years
Endurance ................................................ 100,000 Cycles
Note - The device is not guaranteed to function outside its operating rating. Stresses listed under Absolute Maximum
Ratings may cause permanent damage to the device. These are stress ratings only and functional operation of the
device at these or any other conditions outside those listed in the operational sections of the specification is not implied.
Exposure to any absolute maximum rating for extended periods may affect device performance and reliability. Devices
are ESD sensitive. Handling precautions are recommended.
DC OPERATING CHARACTERISTICS
(Over commercial operating conditions, unless otherwise noted. All voltages are relative to GND.)
Symbol
Parameter
Notes
Min Typ Max
General
VBATT
VIN[7:5],
LDOIN3
Input supply voltage
Regulator power supply
voltage
+2.7
+6.0
+2.7
+6.0
VUVLO
IDD-ACTIVE
Under-voltage lockout voltage
Active supply current
VBATT rising
VBATT falling
All regulators and monitors
enabled – no load, VBATT =
4.2V
2.3
2.4
2.1
3.3
4.5
IDD-STANDBY
IDD-SHUTDOWN
Standby supply current
Shutdown supply current
All regulators disabled,
monitors active, VBATT = 4.2V
All regulators and monitors
disabled, Note 4
130
300
0.6
5
TSHDN
Thermal shutdown temp
160
THYST
Thermal shutdown temp
hysteresis
20
VDD_CAP Voltage on VDD_CAP pin
All logic derived from this
voltage, no load
2.4
2.5
2.6
T = 0°C to +70°C
fOSC
Oscillator frequency (Note 1)
T = -40°C to +85°C
900 1000 1100
850 1000 1150
Unit
V
V
V
V
mA
µA
µA
oC
oC
V
kHz
Summit Microelectronics, Inc
7
Share Link: 