TS4601 Ver la hoja de datos (PDF) - STMicroelectronics
Número de pieza
componentes Descripción
Fabricante
TS4601
STMicroelectronics
TS4601 Datasheet PDF : 28 Pages
| |||
TS4601
Absolute maximum ratings and operating conditions
1
Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings
Symbol
VCC
Vin
Tstg
Tj
Rthja
Pd
ESD
Latch-up
Parameter
Supply voltage (1)
Input voltage
In Master standby mode, and I²C1, 6 and 7
In I²C 2, 3, 4 and 5
Storage temperature
Maximum junction temperature
Thermal resistance junction to ambient (2)
Power dissipation
HBM - human body model(4)
MM - machine model (min. value)(5)
Latch-up immunity
Lead temperature (soldering, 10sec)
Value
6
0 to VCC
-2.4 to +2.4
-65 to +150
150
200
Internally limited(3)
2
200
200
260
Unit
V
V
°C
°C
°C/W
kV
V
mA
°C
1. All voltage values are measured with respect to the ground pin.
2. The device is protected in case of over temperature by a thermal shutdown active @ 150° C.
3. Exceeding the power derating curves during a long period may provoke abnormal operation.
4. Human body model: A 100 pF capacitor is charged to the specified voltage, then discharged through a
1.5 kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations
while the other pins are floating.
5. Machine model: A 200 pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of
connected pin combinations while the other pins are floating.
Table 2. Operating conditions
Symbol
Parameter
Value
Unit
VCC
RL
CL
Toper
Rthja
Supply voltage
Load resistor
Load capacitor
Serial resistor of 12Ω minimum, RL ≥ 16Ω,
Operating free air temperature range
Flip-chip thermal resistance junction to ambient
2.9 to 5.5
≥ 16
0.8 to 100
-40 to +85
90
V
Ω
nF
°C
°C/W
3/28
Share Link: 