UC3842B/3843B
APPLICATION INFORMATION(Cont.)
Shutdown Techniques
LINEAR INTEGRATED CIRCUIT
The UTC UC3842B’s shutdown can be accomplished by two ways: raise pin 3 above 1V; or pull pin 1 below a
voltage two diode drops above ground. Either method can cause the PWM comparator’s output to be high. Because
the PWM latch is reset dominant, the output will remain low until the next clock cycle after the shutdown condition at
pins 1 and/or 3 is removed.
Slope Compensation
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
8 of 11
QW-R103-012.D