DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

AH182D-WL-A(2007) Ver la hoja de datos (PDF) - Diodes Incorporated.

Número de pieza
componentes Descripción
Fabricante
AH182D-WL-A
(Rev.:2007)
Diodes
Diodes Incorporated. 
AH182D-WL-A Datasheet PDF : 9 Pages
1 2 3 4 5 6 7 8 9
Features
Micropower operation
2.5V to 5.5V battery operation
Offset Canceling Technology
Superior temperature stability
Extremely Low Switch-Point Drift
Insensitive to Physical Stress
-40°C to 85°C operating temperature
SIP-3L/SC59 package
Lead Free Finish/RoHS Compliant for Lead Free
products (Note 1)
AH182/AH183
LOW POWER HALL EFFECT SWITCH
General Description
AH182/AH183 is a three-terminal Hall effect sensor device with
an output driver, mainly designed for battery–operation,
hand-held equipment (such as cellular and cordless phones, and
PDA’s) The total operation power is down to 15uW in the 2.75V
supply.
The south pole of sufficient strength will turn the output on in
SIP-3L but the north pole of sufficient strength will turn the output
on in SC59 package. The output will be turned off under no
magnetic field.
While the magnetic flux density (B) is larger than operation point
(Bop), the output will be turned on (low), the output is held until B
is lower than the release point (Brp), then turned off. The
difference between AH182 and AH183 is that the former
consumes less power than that of the latter in the Hall sensor
operation.
Applications
Cover detector
Speed measurement
Home safety
Pin Descriptions
Name
Vdd
GND
Output
P/I/O
P/I
P
O
Pin #
1
2
3
Description
Power Supply Input
Ground
Output Pin
Ordering Information
AH182/AH183 X - X X X
CMOS Hall-
effect Switch
Wafer Body
Package
Blank or
P: SIP-3L
A~Z : if necessary W: SC59
to specify
Lead
Packing
L : Lead Free Blank : Bulk
(Note 2)
A : Spread-leg ammo pack for SIP-3L;
Tape & Reel for SOT23-3L
Note: 1. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
2. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
AH182/AH183 Rev. 2
1 of 9
www.diodes.com
MARCH 2007
© Diodes Incorporated

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]