NCP59150, NCV59150 Series
ABSOLUTE MAXIMUM RATINGS
Symbol
Rating
Value
Unit
VIN
Supply Voltage
0 to 18
V
VEN
Enable Input Voltage
0 to 18
V
VFLG
Error Flag Open Collector Output Maximum Voltage
0 to 18
V
VOUT – VIN Reverse VOUT – VIN Voltage (EN = Shutdown or Vin = 0 V) (Note 1)
0 to 6.5
V
PD
Power Dissipation (Notes 2 and 5)
Internally Limited
TJ
Junction Temperature
−40 v TJ v +125
C
TS
Storage Temperature
−65 v TJ v +150
C
ESD Rating (Notes 3 and 4)
Human Body Model
2000
V
Machine Model
200
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
NOTE: All voltages are referenced to GND pin unless otherwise noted.
1. The ENABLE pin input voltage must be 0.8 V or Vin must be connected to ground potential.
2. PD(max) = (TJ(max) – TA) / RqJA, where RqJA depends upon the printed circuit board layout.
3. Devices are ESD sensitive. Handling precautions recommended..
4. This device series incorporates ESD protection and is tested by the following methods:
ESD Human Body Model (HBM) tested per AEC−Q100−002 (EIA/JESD22−A114C)
ESD Machine Model (MM) tested per AEC−Q100−003 (EIA/JESD22−A115C)
This device contains latch−up protection and exceeds 100 mA per JEDEC Standard JESD78.
5. This protection is not guaranteed outside the Recommended Operating Conditions.
RECOMMENDED OPERATING CONDITIONS (Note 6)
Symbol
Rating
Value
Unit
VIN
Supply Voltage
2.24 to 13.5
V
VEN
Enable Input Voltage
0 to 13.5
V
VFLG
Error Flag Open Collector Voltage
0 to 13.5
V
TJ
Junction Temperature
−40 v TJ v +125
C
6. The device is not guaranteed to function outside it’s Recommended operating conditions.
http://onsemi.com
3