DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

W7CF002G1XA-H41MF-04D.A6 Ver la hoja de datos (PDF) - Unspecified

Número de pieza
componentes Descripción
Fabricante
W7CF002G1XA-H41MF-04D.A6
ETC
Unspecified 
W7CF002G1XA-H41MF-04D.A6 Datasheet PDF : 50 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
INDUSTRIAL GRADE CompactFlashTM Card
W7CFxxxA-H4 Series RoHS 6/6 Compliant
256MB – 32GB
Figure 5: True IDE Mode I/O Access Timing Example
2.3 Configuration Register Specification
This card supports four configuration registers for the purpose of the configuration and observation of this card.
These registers can be used in memory card mode and I/O card mode. In True IDE mode, these registers cannot be
used.
2.3.1 Configuration Option register (Address 200H)
This register is used for setting the card configuration status and for issuing soft reset to the card.
bit 7
bit 6
SRESET
LevlREQ
NOTE:
1. Initial value: 00H
bit 5
INDEX
bit 4
bit 3
bit 2
bit 1
bit 0
Table 15: Option Register Function
Name
R/W
Function
SRESET (HOST->)
Setting this bit to “1”, places the card in the reset state (Card Hard Reset). This
operation is equal to Hard Reset, except this bit is not cleared. Then this bit set to
R/W
“0”, places the card in the reset state of Hard Reset (This bit is set to “0” by Hard
Reset). Card configuration status is reset and the card internal initialized operation
starts when Card hard Reset is executed, so next access to the card should be the
same sequence as the power on sequence.
LevlREQ (HOST->)
R/W
This bit sets to “0” when pulse mode interrupt is selected, and “1” when level mode
interrupt is selected.
INDEX (HOST->)
This bit is used for select operation mode of the card as follows. When Power on,
R/W Card Hard Reset and Soft Reset, this data is “000000” for the purpose of Memory
card interface recognition.
Table 16: INDEX bit assignment
INDEX Bit
543210
Task File register address
000000
0H to FH, 400H to 7FFH
000001
xx0H to xxFH
000010
1F0H to 1F7H, 3F6H to 3F7H
Wintec W7CFxxx-H4 and W8CFxxx-H4 Series Datasheet v1 08.doc
August 2013 Wintec Industries, Inc.
Mapping mode
Memory Mapped
Contiguous I/O Mapped
Primary I/O Mapped
18

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]