Production Data
WM8960
OUTPUT MIXERS
Left and right analogue mixers allow the DAC output and analogue bypass paths to be mixed.
Programmable attenuation and mute is available on the analogue bypass paths from LINPUT3,
RINPUT3 and from the input boost mixers as shown in Figure 13. A mono mix of left and right output
mixers is also available on OUT3.
Figure 13 Output Mixer Path
Left and right mixers are enabled by the LOMIX and ROMIX register bits. The mono mixer is enabled
by OUT3 register bit, which also enables the OUT3 driver.
REGISTER
ADDRESS
R47 (2Fh)
Power
Management
(3)
BIT
LABEL
3
LOMIX
4
ROMIX
R26 (1Ah)
1
Power
Management
(2)
OUT3
Table 21 Output Mixer Enable Control
DEFAULT
DESCRIPTION
0
Left Output Mixer Enable Control
0 = Disabled
1 = Enabled
0
Right Output Mixer Enable Control
0 = Disabled
1 = Enabled
0
Mono Output and Mono Mixer Enable
Control
0 = Mono mixer and output disabled
1 = Mono mixer and output enabled
Inputs to the mixers from the DAC and bypass paths can be individually muted. The bypass paths
have programmable attenuation as shown in Table 22. To prevent pop noise, it is recommended not
to change volume levels of these paths during playback.
w
PD, August 2013, Rev 4.2
35