CXD2409R
(c) HLIM (high speed shutter limiter)
By combining the HLIM1 pin (Pin 62) and the HLIM2 pin (Pin 63), the maximum shutter speed can be
changed.
(ENB = high, IRENB = high)
HLIM1 HLIM2
L
L
H
L
H
H
L
H
Maximum shutter speed
EIA
CCIR
1/100000 (s) 1/70000 (s)
1/30000 (s) 1/30000 (s)
1/10000 (s) 1/10000 (s)
1/5000 (s) 1/5000 (s)
(d) Power on reset
During electronic iris mode (IRENB = high), the initial settings for the iris are made in the instant the
POWER pin (Pin 54) switches from low to high.
The initial setting shutter speed is 1/1000 (s).
By applying the circuit shown below, the shutter speed can be initialized when the power is turned on.
+5 V power supply
100k
0.68µ
54 POWER
55 VSS
56 VDD
– 11 –