Philips Semiconductors
13. Waveforms
74LVC1G11
Single 3-input AND gate
VI
A, B, C
input
GND
VOH
Y output
VOL
VM
tPHL
VM
tTHL
tPLH
001aac031
Fig 5.
Measurement points are given in Table 10.
VOL and VOH are typical output voltage drop that occur with the output load.
The input (A, B, C) to output (Y) propagation delays
Table 10: Measurement points
Supply voltage
Input
VCC
1.65 V to 1.95 V
2.3 V to 2.7 V
2.7 V
VM
0.5 × VCC
0.5 × VCC
1.5 V
3.0 V to 3.6 V
1.5 V
4.5 V to 5.5 V
0.5 × VCC
Output
VM
0.5 × VCC
0.5 × VCC
1.5 V
1.5 V
0.5 × VCC
VCC
VI
PULSE
GENERATOR
VO
D.U.T.
RT
VEXT
RL
CL
RL
mna616
Test data is given in Table 11.
Definitions for test circuit:
RL = Load resistor.
CL = Load capacitance including jig and probe capacitance
RT = Termination resistance should be equal to the output impedance Zo of the pulse
generator.
Fig 6. Load circuitry for switching times
9397 750 14209
Product data sheet
Rev. 01 — 30 November 2004
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
8 of 14