UA1029
LINEAR INTEGRATED CIRCUIT
3. Input voltage
When the excessive signal is input, turning-up is produced in the clip waveform.
4. Oscillation preventive measures
Mylar capacitor in use is strongly recommended to fulfill well handled of oscillation temperature and high
frequency.
5. Power ON/OFF switch
There is power ON/OFF switch at Pin 7. However, output power is changed by Pin 7 supply voltage when Pin 7
supply voltage is not same Pin 3 supply voltage, after referring to attached date, select Pin 7 supply voltage.
6. Thermal shut-down Protection
The thermal shut-down circuit is built-in to dodge IC damage that result from the abnormal temperature rise during
operating.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
6
QW-R107-033.B