SST58SM032-70-C-FSI データシートの表示（PDF） - Silicon Storage Technology

部品番号

コンポーネント説明

メーカー

SST58SM032-70-C-FSI

ATA-Disk Module

Silicon Storage Technology 

ATA-Disk Module

SST58SM008 / 016 / 024 / 032 / 048 / 064 / 096 / 128 / 192

SST58LM008 / 016 / 024 / 032 / 048 / 064 / 096 / 128 / 192

Advance Information

3.2.1.3 Format Track - 50H

Bit ->

7

6

5

4

3

2

1

0

Command (7)

50H

C/D/H (6)

1

LBA

1

Drive

Head (LBA 27-24)

Cyl High (5)

Cylinder High (LBA 23-16)

Cyl Low (4)

Cylinder Low (LBA 15-8)

Sec Num (3)

X (LBA 7-0)

Sec Cnt (2)

Count (LBA mode only)

Feature (1)

X

This command writes the desired head and cylinder of the selected drive with a vendor unique data

pattern (typically FFH or 00H). To remain host backward compatible, the ADM expects a sector buffer of

data from the host to follow the command with the same protocol as the Write Sector(s) command

although the information in the buffer is not used by the ADM. If LBA=1 then the number of sectors to

format is taken from the Sec Cnt register (0=256). The use of this command is not recommended.

3.2.1.4 Identify Drive - ECH

Bit ->

7

6

5

4

3

2

1

0

Command (7)

ECH

C/D/H (6)

X

X

X

Drive

X

Cyl High (5)

X

Cyl Low (4)

X

Sec Num (3)

X

Sec Cnt (2)

X

Feature (1)

X

The Identify Drive command enables the host to receive parameter information from the ADM. This

command has the same protocol as the Read Sector(s) command. The parameter words in the buffer

have the arrangement and meanings defined in Table 3-4. All reserved bits or words are zero. Table 3-4

is the definition for each field in the Identify Drive Information.

©2001 Silicon Storage Technology, Inc.

21

S71193-01-000 9/01 519

Share Link: