35XS3500(2011) データシートの表示（PDF） - Freescale Semiconductor
部品番号
コンポーネント説明
メーカー
35XS3500 Datasheet PDF : 41 Pages
| |||
ELECTRICAL CHARACTERISTICS
STATIC ELECTRICAL CHARACTERISTICS
STATIC ELECTRICAL CHARACTERISTICS
Table 3. Static Electrical Characteristics
Characteristics noted under conditions 3.0 V ≤ VCC ≤ 5.5 V, 7.0 V ≤ VBAT ≤ 20 V, -40 °C ≤ TA ≤ 125 °C, unless otherwise noted.
Typical values noted reflect the approximate parameter mean at TA = 25 °C under nominal conditions, unless otherwise noted.
Characteristic
Symbol
Min
Typ
Max Unit
POWER INPUT (VBAT, VCC)
Battery Supply Voltage Range
Full Performance and Short Circuit
Extended Voltage Range(5)
VBAT
7.0
–
6.0
–
V
20
28
Battery Supply Under-voltage (UV flag is set ON)
Battery Voltage Clamp (OV flag is set ON)
Battery Voltage Clamp
Battery Supply Power on Reset(8)
If VBAT < 5.5 V, VBAT = VCC
If VBAT < 5.5 V, VBAT = 0
VBAT Supply Current @ 25 °C and VBAT =12 V and VCC = 5.0 V
Sleep State Current, Outputs Open
Sleep State Current, Outputs Grounded
Normal Mode, IGN = 5.0 V, RST = 5.0 V, Outputs Open
Digital Voltage Range, Full Performance
Digital Supply Under-voltage (VCC Failure)
Sleep Current Consumption on VCC @ 25 °C and VBAT = 12 V
Output OFF
Supply Current Consumption on VCC and VBAT = 12 V
No SPI
3.0 MHz SPI Communication
VBATUV
5.0
5.5
6.0
V
VBATCLAMP_OV
27.5
30
32.5
V
VBATCLAMP
40
–
48
V
V
VBATPOR1
2.0
–
3.0
VBATPOR2
2.0
–
4.0
IBATSLEEP1
IBATSLEEP2
IBAT
VCC
VCCUV
ICCSLEEP
ICC
–
0.5
5.0
μA
–
0.5
5.0
μA
–
10
20
mA
3.0
–
5.5
V
2.2
2.5
2.8
V
–
0.2
5.0
μA
–
–
2.6
mA
–
–
5.0
LOGIC INPUT/ OUTPUT (IGN, CS, CSNS, SI, SCLK, CLOCK, SO, FLASHER, RST, LIMP, STOP)
Input High Logic Level(6)
Input Low Logic Level(6)
Ignition Threshold Level (IGN, FLASHER, STOP and RST)
Input Clamp Voltage (IGN, FLASHER, LIMP, STOP, CS, SCLK, SI, RST)
I = 1.0 mA
Input Forward Voltage (IGN, FLASHER, LIMP, STOP, CS, SCLK, SI, RST)
I = 1.0 mA
Input Passive Pull-up Resistance on CS pin(7)
Input Passive Pull-down Resistance on SI, SCLK, FLASHER, IGN, FOG,
CLOCK, LIMP and RST pins(7)
SO High-state Output Voltage
IOH = 1.0 mA
VIH
VIL
VIGNTH
VCL_POS
VCL_NEG
RUP
RDWN
VSOH
2.0
–
–
V
–
–
0.8
V
1.0
2.2
V
7.5
–
13
V
- 2.0
–
-0.3
V
100
200
400
kΩ
100
200
500
kΩ
0.8
0.95
VCC
–
Notes
5. In extended mode, the functionality is guaranteed but not the electrical parameters.
6. Valid for RST, SI, SCLK, CLOCK, FLASHER, STOP, and LIMP pins.
7. Valid for the following input voltage range: VCC = -0.3 to +0.3 V.
8. Please refer to Loss of VBAT section for more details.
35XS350
6
Analog Integrated Circuit Device Data
Freescale Semiconductor
Share Link: 