B1018 データシートの表示（PDF） - Unspecified

部品番号

コンポーネント説明

メーカー

B1018

Desoldering Tool

Unspecified 

Troubleshooting Guide

WARNING : If the power cord is damaged, it must be

replaced by the manufacturer, its service

agent or similarity qualified person in order

to avoid personal injury or damage to the

unit.

 Power lamp does not light up.

• Is the power cord plugged in correctly.

Securely insert the power cord into the power supply.

• Is the fuse blown?

Determine why the fuse blew and eliminate the cause,

then replace the fuse.

Example Is the inside of the gun short-circuited?

 Solder is not being absorbed.

• Is the spring filter full of solder?

Replace it with a new one. (refer to p.13)

• Is the ceramic filter hardened?

Replace it with a new one .

• Is there a vacuum leak?

Check the connections and replace any worn parts.

(refer to p.10)

• Is the compressor providing the proper air pressure?

Check the air pressure and the inside diameter and

length of the tube. (refer to p.6)

 The nozzle does not heat up.

• Is the desoldering gun cord assembly properly con-

nected?

Reconnect it. (refer to p.6)

• Is the heating element damaged?

Replace it. (refer to p.17)

NOTE : When repairs are needed, please send both the

desoldering gun and the station to your sales

agent.

11

Share Link: