BLM18AG601SN1J データシートの表示（PDF） - Murata Manufacturing
部品番号
コンポーネント説明
メーカー
BLM18AG601SN1J Datasheet PDF : 88 Pages
| |||
BLp Chip Ferrite Bead Soldering and Mounting
3. Standard Soldering Conditions
(1) Soldering Methods
Use flow and reflow soldering methods only.
Use standard soldering conditions when soldering chip
ferrite beads.
In cases where several different parts are soldered, each
having different soldering conditions, use those
conditions requiring the least heat and minimum time.
Solder: Use Sn-3.0Ag-0.5Cu solder. Use of Sn-Zn based
solder will deteriorate performance of products.
If using BLA series with Sn-Zn based solder,
please contact Murata in advance.
Flux:
o Use Rosin-based flux.
In case of using RA type solder, products should be
cleaned completely with no residual flux.
o Do not use strong acidic flux (with chlorine content
exceeding 0.20wt%)
o Do not use water-soluble flux.
For additional mounting methods, please contact Murata.
(2) Soldering Profile
oFlow Soldering profile
( Sn-3.0Ag-0.5Cu Solder)
T3
T2
t2
T1
Heating
Limit Profile
Standard Profile
Series
BLM (Except BLM02/03/15/18G)
BLA31
Pre-heating
t1
Time (s)
Pre-heating
Temp. (T1) Time. (t1)
150°C 60s min.
Standard Profile
Heating
Temp. (T2) Time. (t2)
Cycle
of Flow
250°C
4 to 6s
2 times
max.
Limit Profile
Heating
Temp. (T3) Time. (t2)
265±3°C 5s max.
Cycle
of Flow
2 times
max.
oReflow Soldering Profile
(Sn-3.0Ag-0.5Cu Solder)
BLM
BLA
Series
T4
T2
T1
T3
180
150
Limit Profile
Pre-heating t1
t2
Standard Profile
90s±30s
Time (s)
Standard Profile
Heating
Peak
Temperature
Cycle
Temp. (T1) Time. (t1)
(T2)
of Reflow
Limit Profile
Heating
Peak
Temperature
Cycle
Temp. (T3) Time. (t2)
(T4)
of Reflow
220°C min. 30 to 60s 245±3°C
2 times
max.
230°C min. 60s max. 260°C/10s
2 times
max.
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
C31E.pdf
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.
Mar.28,2011
93
Share Link: 