ADG701 データシートの表示（PDF） - Analog Devices

部品番号

コンポーネント説明

メーカー

ADG701

CMOS Low Voltage 2 Ω SPST Switch

Analog Devices 

ADG701/ADG702

TERMINOLOGY

Table 7.

Term

Description

RON

RFLAT(ON)

Ohmic resistance between D and S.

Flatness is defined as the difference between the maximum and minimum value of on resistance as measured over the

specified analog signal range.

IS (OFF)

ID (OFF)

ID, IS (ON)

VD (VS)

CS (OFF)

CD (OFF)

CD, CS (ON)

tON

tOFF

Off Isolation

Charge Injection

Bandwidth

On Response

On Loss

Source leakage current with the switch off.

Drain leakage current with the switch off.

Channel leakage current with the switch on.

Analog voltage on terminals D and S.

Off switch source capacitance.

Off switch drain capacitance.

On switch capacitance.

Delay between applying the digital control input and the output switching on. See Figure 14.

Delay between applying the digital control input and the output switching off.

A measure of unwanted signal coupling through an off switch.

A measure of the glitch impulse transferred from the digital input to the analog output during switching.

The frequency at which the output is attenuated by −3 dB.

The frequency response of the on switch.

The voltage drop across the on switch seen in Figure 10 as the number of decibels that the signal is from 0 dB at very

low frequencies.

Rev. C | Page 8 of 12

Share Link: