IS42S16800D データシートの表示（PDF） - Integrated Silicon Solution
部品番号
コンポーネント説明
メーカー
IS42S16800D Datasheet PDF : 62 Pages
| |||
IS42S81600D, IS42S16800D
DC ELECTRICAL CHARACTERISTICS 1 (Recommended Operation Conditions unless otherwise noted.)
Symbol Parameter
IDD1 (1)
Operating Current
IDD2P
IDD2PS
IDD2N (2)
IDD2NS
IDD3N (2)
IDD3NS
IDD4
Precharge Standby Current
(In Power-Down Mode)
Precharge Standby Current
(In Power-Down Mode)
Precharge Standby Current
(In Non Power-Down Mode)
Precharge Standby Current
(In Non Power-Down Mode)
Active Standby Current
(In Non Power-Down Mode)
Active Standby Current
(In Non Power-Down Mode)
Operating Current
IDD5
Auto-Refresh Current
IDD6
Self-Refresh Current
Test Condition
One bank active, CL = 3, BL = 1,
tCLK = tCLK (min), tRC = tRC (min)
CKE ≤ VIL (MAX), tCK = 15ns
CKE ≤ VIL (MAX), CLK ≤ VIL (MAX)
CS ≥ Vcc - 0.2V, CKE ≥ VIH (MIN)
tCK = 15ns
CS ≥ Vcc - 0.2V, CKE ≥ VIH (MIN) or
CKE ≤ VIL (MAX), All inputs stable
CS ≥ Vcc - 0.2V, CKE ≥ VIH (MIN)
tCK = 15ns
CS ≥ Vcc - 0.2V, CKE ≥ VIH (MIN) or
CKE ≤ VIL (MAX), All inputs stable
All banks active, BL = 4, CL = 3,
tCK = tCK (min)
tRC = tRC (min), tCLK = tCLK (min)
CKE ≤ 0.2V
Notes:
1. IDD (MAX) is specified at the output open condition.
2. Input signals are changed one time during 30ns.
-6
-7 -75E Unit
x8 120 100
mA
x16 140 120 120 mA
x8 / x16
2
2 2 mA
x8 / x16
1
1 1 mA
x8 / x16
25
25 25 mA
x8 / x16
15
15 15 mA
x8 / x16
30
30 30 mA
x8 / x16
20
20 20 mA
x8 170 120
mA
x16 180 130 130 mA
x8 180 160
mA
x8 / x16
2
2 2 mA
DC ELECTRICAL CHARACTERISTICS 2 (Recommended Operation Conditions unless otherwise noted.)
Symbol Parameter
IIL
Input Leakage Current
IOL
Output Leakage Current
VOH
Output High Voltage Level
VOL
Output Low Voltage Level
Test Condition
0V ≤ Vin ≤ Vcc, with pins other than
the tested pin at 0V
Output is disabled, 0V ≤ Vout ≤ Vcc,
IOH = -2mA
IOL = 2mA
Min Max Unit
-5
5
μA
-5
5
μA
2.4
—
V
—
0.4
V
16
Integrated Silicon Solution, Inc. — www.issi.com
Rev. E
07/28/08
Share Link: 