MC100H607 データシートの表示（PDF） - ON Semiconductor
部品番号
コンポーネント説明
メーカー
MC100H607 Datasheet PDF : 7 Pages
| |||
MC10H607, MC100H607
Table 3. 10H PECL DC CHARACTERISTICS (VCCT = VCCE = 5.0 V ± 5%)
Symbol
Characteristic
Condition
TA = 0°C
Min Max
TA = 25°C
Min Max
TA = 85°C
Min Max Unit
IINH
Input HIGH Current
IINL
Input LOW Current
VIH
Input HIGH Voltage
VIL
Input LOW Voltage
VBB
Output Bias Voltage
VCCT = 5.0 V
VCCT = 5.0 V
VCCT = 5.0 V
255
175
175 mA
0.5
0.5
0.5 mA
3830 4160 3870 4190 3930 4280 mV
3050 3520 3050 3520 3050 3555 mV
3600 3710 3630 3730 3670 3790 mV
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
1. PECL VIL, VIH, VOL, VOH, VBB are given for VCCT = VCCE = 5.0 V and will vary 1:1 with power supply.
Table 4. 100H PECL DC CHARACTERISTICS (VCCT = VCCE = 5.0 V ± 5%)
Symbol
Characteristic
Condition
TA = 0°C
Min Max
TA = 25°C
Min Max
TA = 85°C
Min Max Unit
IIH
Input HIGH Current
IIL
Input LOW Current
VIH
Input HIGH Voltage
VIL
Input LOW Voltage
VBB
Output Bias Voltage
VCCT = 5.0 V
VCCT = 5.0 V
VCCT = 5.0 V
255
175
175 mA
0.5
0.5
0.5 mA
3835 4120 3835 4120 3835 4120 mV
3190 3525 3190 3525 3190 3525 mV
3600 3720 3600 3720 3600 3720 mV
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
2. PECL VIL, VIH, VOL, VOH, VBB are given for VCCT = VCCE = 5.0 V and will vary 1:1 with power supply.
Table 5. 10H/100H TTL DC CHARACTERISTICS (VCCT = VCCE = 5.0 V ± 5%)
TA = 0°C
Symbol
Characteristic
Condition
Min Max
TA = 25°C
Min Max
TA = 85°C
Min Max Unit
VOH
Output HIGH Voltage
VOL
Output LOW Voltage
IOH = −15 mA
IOH = −24 mA
IOL = 48 mA
2.5
2.5
2.5
V
2.0
2.0
2.0
0.55
0.55
0.55 V
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm. Electrical parameters are guaranteed only over the declared
operating temperature range. Functional operation of the device exceeding these conditions is not implied. Device specification limit
values are applied individually under normal operating conditions and not valid simultaneously.
3. DC levels such as VOH, VOL, etc., are standard for PECL and FAST devices, with the exceptions of: IOL = 48 mA at 0.5 VOL;
and IOH = −24 mA at 2.0 VOH.
http://onsemi.com
3
Share Link: 