ML7000-03 データシートの表示（PDF） - Oki Electric Industry

部品番号

コンポーネント説明

メーカー

ML7000-03

Single Rail CODEC

Oki Electric Industry 

¡ Semiconductor

ML7000-01/02/03/ML7001-01/02/03

NOTES ON USE

• To ensure proper electrical characteristics, use bypass capacitors with excellent high frequency

characteristics for the power supply and keep them as close as possible to the device pins.

• Connect the AG pin and the DG pin as closely as possible. Connect to the system ground with

low impedance.

• Mount the device directly on the board when mounted on PCBs. Do not use IC sockets. If the

use of IC socket is unavoidable, use the short lead type socket.

• When mounted on a frame, use electromagnetic shielding if any electromagnetic wave

sources such as power supply transformers surrounds the device.

• Keep the voltage on the VDD pin not lower than –0.3 V even instantaneously to avoid latch-

up that may otherwise occur when power is turned on.

• Use a low noise (particularly, low level type of high frequency spike noise or pulse noise)

power supply to avoid erroneous operation and the degradation of the characteristics of these

devices.

17/19

Share Link: