PCD5041 データシートの表示（PDF） - Philips Electronics

部品番号

コンポーネント説明

メーカー

PCD5041

DECT burst mode controller

Philips Electronics 

Philips Semiconductors

DECT burst mode controller

Objective specification

PCD5041

1 FEATURES

• On-chip pre-programmed Communication Controller

with embedded firmware for implementation of Traffic

Bearer Control (TBC), MAC message handling,

scanning, and control of the device’s other functional

units.

• Portable Part (PP) modes

• TDMA frame (de)multiplexing

• Encryption

• Scrambling

• CRC generation and checking

• Beacon transmission control (by P00 packets)

• On-chip comparator for receive data slicer function (only

available in the LQFP80 package)

• Switches up to12 active speech channels from speech

interface to 1152 kbit/s. radio interface, and vice versa

• Dual channel speech/data capability

• Received Signal Strength Indication (RSSI)

measurement, with on-chip 6-bits peak/hold detector

• Quality control report

• Digital Phase Locked Loop (DPLL)

• Synchronization (handset to active bearer, base station

to cluster of RFPs)

• Seamless handover procedure

• Fast (hardware) and slow (software) mute function

• 1 kbyte extended RAM memory

• On-chip crystal oscillator (13.824 MHz)

• Programmable microcontroller clock frequency

• Programmable interrupts

• Watchdog with two programmable time-outs

• Low power consumption in standby mode

• Low supply voltage (2.7 to 5.5 V)

• SACMOS technology.

2 GENERAL DESCRIPTION

The PCD5041 DECT Burst Mode Controller (BMC) is a

custom IC that performs the DECT Physical Layer and

MAC Layer time-critical functions, for use in DECT

handset products which comply with the following

standards (and updates):

• DECT CI part 2: Physical layer (DE/RES 3001-2)

• DECT CI part 3 : Medium Access Control layer

(DE/RES 3001-3)

• DECT CI part 7: Security features for DECT

(DE/RES 3001-7)

• DECT CI part 9: Public Access Profile

(DE/RES 3001-9).

The PCD5041 has interfaces to:

• ADPCM CODECs in the handset mode

• A radio transceiver; the interface is fully decoded, and

includes power-down signals

• An external microcontroller.

The PCD5041 is designed to be connected to an ADPCM

CODEC (Philips’ PCD5032, for example) and an

80C51-type microcontroller. Other microcontrollers (e.g.

68000) and CODECs can also be supported.

3 ORDERING INFORMATION

TYPE

NUMBER

PCD5041H

PCD5041HZ

PACKAGE

NAME

DESCRIPTION

QFP64 plastic quad flat package; 64 leads (lead length 1.95 mm); body

14 × 20 × 2.8 mm

LQFP80 plastic low profile quad flat package; 80 leads; body 12 × 12 × 1.4 mm

VERSION

SOT319-2

SOT315-1

1996 Oct 31

3

Share Link: