INNOLINE
DC/DC-Converter
RP100-SB
Series
Specifications (refer to the standard application circuit, Ta: 25°C)
Input Voltage Range
Under-Voltage Lockout
Input Filter
Input Surge Voltage 100ms max
Start up time
Remote ON/OFF (Note 2)
(Positive logic)
(Negative logic)
Continuous Output Power
Output Voltage Accuracy
Output Voltage Adjustment (Note 1)
Minimum Load
Line Regulation
Load Regulation
Remote Sense (Note 1)
Ripple and Noise 20MHz bandwidth
Temperature Coefficient
Transient Response Recovery Time
Over Voltage Protection threshold (Hiccup)
Over Current Protection threshold
Short Circuit Protection
Efficiency (at nominal input voltage, full load)
Isolation Voltage
Isolation Resistance
Isolation Capacitance
Operating Frequency
Operating Temperature Range (Note 3)
Over Temperature Protection
Storage Temperature Range
Humidity max., Non-condensing
Thermal Shock
Vibration
Humidity
Conducted Emissions
Radiated Emisssions
36-75VDC
Power Up
Power Down
Nominal Vin and constant resistive load
ON=Open or 3.5V < Vr < 15V,
OFF=Short or 0V < Vr < 1.2V,
ON=Short or 0V < Vr < 1.2V,
OFF=Open or 3.5V < Vr < 15V,
full load and nominal Vin
low line to high line at full load
0% to 100% full load
With 10µF tantalum and 1µF ceramic across Output
25% load step change
Input to Output
Input to Case
Output to Case
10 ~ 55Hz 2G, 3minutes period, 30minutes analog
Non Condensing
EN55022 (Note 4)
EN55022 (Note 4)
EN55022 (Note 4)
(48V nom.)
34V typ.
32V typ.
L-C type
100VDC
25ms typ.
IIN=1mA max.
IIN=1mA max.
IIN=1mA max.
IIN=1mA max.
100W max.
±1.5%
+10%, -20%
0%
±0.2%
See table
10% of Vout
100mVp-p
±0.02%/ºC
200µs
120% of Vout
110% ~ 140% of Iout Rated
Hiccup, Automatic recovery
up to 91%.
1600VDC min.
1000VDC min.
1000VDC min.
10 MΩ min.
2500pF max.
270KHz typ.
-40ºC to +100ºC (base plate)
110°C
-55°C to +125°C
95%
MIL-STD-810D
X, Y and Z
95% max.
Level A
Level B
Level A
Continued on next page
202
July-2006
www.recom-international.com