ST8016S データシートの表示（PDF） - Sitronix Technology Co., Ltd.

部品番号

コンポーネント説明

メーカー

ST8016S

COM/SEG LCD Driver

Sitronix Technology Co., Ltd. 

ST8016S

1. FEATURES

Number of LCD drive outputs: 160

Supply voltage for LCD drive: +15.0 to +30.0 V

Supply voltage for the logic system: +2.5 to +5.5 V

Low power consumption

Low output impedance

(Segment mode)

Shift clock frequency

- 20 MHz (MAX.): VDD = +5.0 ± 0.5 V

- 15 MHz (MAX.): VDD = +3.0 to + 4.5 V

- 12 MHz (MAX.): VDD = +2.5 to + 3.0 V

Adopts a data bus system

4-bit/8-bit parallel input modes are

selectable with a mode (MD) pin

Automatic transfer function of an

enable signal

Automatic counting function which, in

the chip selection mode, causes the

internal clock to be stopped by

automatically counting 160 bits of

input data

Line latch circuits are reset when

/DISPOFF active

(Common mode)

Shift clock frequency: 4 MHz (MAX.)

Built-in 160-bit bi-directional shift

register (divisible into 80 bits x 2)

Available in a single mode (160-bit

shift register) or in a dual mode

(80-bit shift register x 2)

Y1->Y160 Single mode

Y160->Y1 Single mode

Y1->Y80, Y81->Y160 Dual mode

Y160->Y81, Y80->Y1 Dual mode

The above 4 shift directions are

pin-selectable

Shift register circuits are reset when

/DISPOFF active

2. DESCRIPTION

The ST8016S is a 160-output segment/common driver IC suitable for driving large/medium scale

dot matrix LCD panels, and is used in personal computers/work stations. The ST8016S is good

both as a segment driver and a common driver, and it can create a low power consuming,

high-resolution LCD.

Preliminary Ver 0.24

Page 2/26

2009/10/01

Share Link: