AD7226
SINGLE SUPPLY (VDD = 15 V ؎ 5%, VSS = AGND = DGND = O V; VREF = 10 V1 unless otherwise noted.
All specifications TMIN to TMAX unless otherwise noted.)
Parameter
K, B Versions2
Unit
Conditions/Comments
STATIC PERFORMANCE
Resolution
8
Total Unadjusted Error
±2
Differential Nonlinearity
±1
REFERENCE INPUT
Input Resistance
2
Input Capacitance3
50
200
Bits
LSB max
LSB max
kW min
pF min
pF max
Guaranteed Monotonic
Occurs when each DAC is loaded with all 0s.
Occurs when each DAC is loaded with all 1s.
DIGITAL INPUTS
Input High Voltage, VINH
Input Low Voltage, VINL
Input Leakage Current
Input Capacitance
Input Coding
2.4
0.8
±1
8
Binary
V min
V max
mA max
pF max
VIN = 0 V or VDD
DYNAMIC PERFORMANCE
Voltage Output Slew Rate4
Voltage Output Settling Time4
Digital Crosstalk
Minimum Load Resistance
POWER SUPPLIES
VDD Range
IDD
NOTES
1Maximum possible reference voltage.
2Temperature ranges are as follows:
K Version: –40∞C to +85∞C
B Version: –40∞C to +85∞C
3Guaranteed by design. Not production tested.
4Sample Tested at 25∞C to ensure compliance.
Specifications subject to change without notice.
2
4
10
2
14.25/15.75
13
V/ms min
ms max
nV secs typ
kW min
Settling Time to ± 1/2 LSB
VOUT = +10 V
V min/V max For Specified Performance
mA max
Outputs Unloaded; VIN = VINL or VINH
ABSOLUTE MAXIMUM RATINGS1
VDD to AGND . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V, +17 V
VDD to DGND . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V, +17 V
VSS to AGND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –7 V, VDD
VSS to DGND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –7 V, VDD
VDD to VSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V, +24 V
AGND to DGND . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V, VDD
Digital Input Voltage to DGND . . . . . . . –0.3 V, VDD + 0.3 V
VREF to AGND . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V, VDD
VOUT to AGND2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . VSS, VDD
Power Dissipation (Any Package) to 75∞C . . . . . . . . . . 500 mW
Derates above 75∞C by . . . . . . . . . . . . . . . . . . . . . 2.0 mW/∞C
Operating Temperature
Commercial (K Version) . . . . . . . . . . . . . . . –40∞C to +85∞C
Industrial (B Version) . . . . . . . . . . . . . . . . . –40∞C to +85∞C
Storage Temperature . . . . . . . . . . . . . . . . . . . –65∞C to +150∞C
Lead Temperature (Soldering, 10 secs) . . . . . . . . . . . . . 300∞C
NOTES
1Stresses above those listed under Absolute Maximum Ratings may cause perma-
nent damage to the device. This is a stress rating only, functional operation of the
device at these or any other conditions above those indicated in the operational
sections of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
2Outputs may be shorted to AGND provided that the power dissipation of the
package is not exceeded. Typically short circuit current to AGND is 50 mA.
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection. Although the
AD7226 features proprietary ESD protection circuitry, permanent damage may occur on devices
subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended
to avoid performance degradation or loss of functionality.
REV. D
–3–