UPD168112K9-5B4 データシートの表示（PDF） - NEC => Renesas Technology

部品番号

コンポーネント説明

メーカー

UPD168112K9-5B4

SERIAL CONTROL H-BRIDGE DRIVER FOR CAMERA LENS DRIVING

NEC => Renesas Technology 

µPD168112

Example of Address Setting

LATCH

SCLK

SDATA

Address 0 Address 1

Address 4 Address 2

VD

Initialization

Address 0

Address 1

DC motor

Address 2

Address 4

Address 3−1 to 3−4 Address 2 Address 5 Address 2

Stepper motor

Address 2

Address 3−1 to 3−4

Constant-current driving

Address 2

Address 5

Be sure to perform initialization (addresses 0 and 1) immediately and after power application and RESET. Transmit

the data of only addresses 0 and 1 for the initialization operation. After the initialization operation, the system can be

controlled simply by inputting driving data (addresses 2 to 5). To execute initialization again, the RESET pin must be

mode high level.

To set a stepper motor, be sure to input the VD signal. If only the VD signal is input, the previous status is held and

the output does not change.

Data Sheet S15866EJ1V0DS

9

Share Link: