WM8976 データシートの表示（PDF） - Wolfson Microelectronics plc

部品番号

コンポーネント説明

メーカー

WM8976

Stereo CODEC With Speaker Driver

Wolfson Microelectronics plc 

Pre-Production

WM8976

INPUT LIMITER / AUTOMATIC LEVEL CONTROL (ALC)

The WM8976 has an automatic PGA gain control circuit, which can function as an input peak limiter

or as an automatic level control (ALC).

The Automatic Level Control (ALC) provides continuous adjustment of the input PGA in response to

the amplitude of the input signal. A digital peak detector monitors the input signal amplitude and

compares it to a register defined threshold level (ALCLVL).

If the signal is below the threshold, the ALC will increase the gain of the PGA at a rate set by

ALCDCY. If the signal is above the threshold, the ALC will reduce the gain of the PGA at a rate set

by ALCATK.

The ALC has two modes selected by the ALCMODE register: normal mode and peak limiter mode.

The ALC/limiter function is enabled by setting the register bit R32[8] ALCSEL.

REGISTER BIT

ADDRESS

LABEL

R32 (20h)

2:0 ALCMIN

ALC Control

[2:0]

1

5:3 ALCMAX

[2:0]

8:7 ALCSEL

R33 (21h)

3:0

ALC Control

2

ALCLVL

[3:0]

DEFAULT

DESCRIPTION

000 (-12dB)

111

(+35.25dB)

00

1011

(-6dB)

Set minimum gain of PGA

000 = -12dB

001 = -6dB

010 = 0dB

011 = +6dB

100 = +12dB

101 = +18dB

110 = +24dB

111 = +30dB

Set Maximum Gain of PGA

111 = +35.25dB

110 = +29.25dB

101 = +23.25dB

100 = +17.25dB

011 = +11.25dB

010 = +5.25dB

001 = -0.75dB

000 = -6.75dB

ALC function select

00 = ALC disabled

01 = Right channel ALC enabled

10 = Left channel ALC enabled

11 = Both channels ALC enabled

ALC target – sets signal level at ADC

input

1111 = -1.5dBFS

1110 = -1.5dBFS

1101 = -3dBFS

1100 = -4.5dBFS

1011 = -6dBFS

1010 = -7.5dBFS

1001 = -9dBFS

1000 = -10.5dBFS

0111 = -12dBFS

0110 = -13.5dBFS

0101 = -15dBFS

0100 = -16.5dBFS

0011 = -18dBFS

0010 = -19.5dBFS

0001 = -21dBFS

0000 = -22.5dBFS

w

PP Rev 3.0 April 2006

29

Share Link: