JANTXV1N6115US データシートの表示（PDF） - Microsemi Corporation
部品番号
コンポーネント説明
メーカー
JANTXV1N6115US
Microsemi Corporation
JANTXV1N6115US Datasheet PDF : 6 Pages
| |||
1N6103AUS – 1N6137AUS
MECHANICAL and PACKAGING
• CASE: Hermetically sealed voidless hard glass with tungsten slugs.
• TERMINALS: Tin/lead plate over copper. RoHS compliant matte-tin is available on commercial grade only.
• MARKING: None.
• POLARITY: No polarity marking for these bidirectional TVSs.
• TAPE & REEL option: Standard per EIA-481-B. Consult factory for quantities.
• WEIGHT: Approximately 539 milligrams.
• See Package Dimensions on last page.
Applicable to entire series:
Reliability Level
JAN = JAN Level
JANTX = JANTX Level
JANTXV = JANTXV Level
Blank = commercial
JEDEC type number
See Electrical Characteristics
table
PART NOMENCLATURE
JAN 1N6103 A US (e3)
RoHS Compliance
e3 = RoHS compliant (available
on commercial grade only)
Blank = non-RoHS compliant
Surface Mount Package
Voltage Tolerance
A = Standard
Blank =5% higher VC, 5% lower
min. V(BR) and 5% lower IPP
Applicable to 1N6103(A)US – 1N6118(A)US only:
JANS 1N6103 A US
Reliability Level
JANS = JANS Level
JEDEC type number
See Electrical Characteristics
table
Surface Mount Package
Voltage Tolerance
A = Standard
Blank =5% higher VC, 5% lower
min. V(BR) and 5% lower IPP
Applicable to 1N6119(A)US – 1N6137(A)US only:
MSP 1N6119 A US (e3)
Reliability Level
MSP (reference JANS)
JEDEC type number
See Electrical Characteristics
table
RoHS Compliance
e3 = RoHS compliant
Blank = non-RoHS compliant
Surface Mount Package
Voltage Tolerance
A = Standard
Blank =5% higher VC, 5% lower
min. V(BR) and 5% lower IPP
T4-LDS-0277-1, Rev. 1 (121354)
©2013 Microsemi Corporation
Page 2 of 6
Share Link: 